The Trials and Tribulations of 3D Printing a Gas-Powered Engine (Part 1)
Fascinated by 3D printed engines, I decided to try and make my own gas powered 3d printed engine. The project began with me designing a 2 stroke all the way back in March 2021 when I just recently dug it out and was set on trying to make an engine.
#3d printing #engines
Видео The Trials and Tribulations of 3D Printing a Gas-Powered Engine (Part 1) канала Camden Bowen
#3d printing #engines
Видео The Trials and Tribulations of 3D Printing a Gas-Powered Engine (Part 1) канала Camden Bowen
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
2 Rotor 3D Printed Rotary Air Engine!Modernizing the Shepherds Sling3D Printed Four Cylinder Running DemonstrationMaking a New Cylinder for the 3D Printed Gas Engine (so it runs, like, properly)Sparking Ideas for an Ignition System: 3D Printed Gas Engine (Part 3)3D Printed Gas-Powered Engine Ran until FailureFinally Upgrading my 3D Printed VTEC Engine, Then DYNO Testing itBreathing Life into the 3D Printed Gas Engine (Part 4)3D Air Powered Wankel Rotary Engine Mk.II! Major Improvements!I Tested a 3D Printed Shock Absorber3D Printed Four Cylinder EngineVariable Valve Timing Air EngineThe 3D Printed Vacuum Pump (literally) SUCKS!Adding a Carburetor to my 3D Printed Gas Engine, and now it RUNS!I 3D Printed a Transmission: How Strong is it?A New Type of Rotary Engine: The 'Liquid Piston'What Happens to a Fluid Coupler When it Gets Too Warm?How to Make a Beautiful Hex Nut Ring3D Printed Mechanical Television (And Camera!)3D Printed Motorcycle Clutch: Will it Break?Update on the 3D Printed Gas Engine: It Fires!