Загрузка страницы

QAV400 Build Intro and Why I Chose The QAV400 Over The QAV500

I'm really looking forward to this QAV400 build. I purchased the QAV400 ARF kit last week and will give an overview of why I purchased it before I put it together. The kit can be found here:

http://bit.ly/1alJ2k5

I plan on putting the frame together this weekend and then install a few different flight controllers to test. I'm most excited about vibration free GoPro footage so we'll see how it goes.

Thanks for following along!

Видео QAV400 Build Intro and Why I Chose The QAV400 Over The QAV500 канала Dennis Baldwin
Показать
Комментарии отсутствуют
Введите заголовок:

Введите адрес ссылки:

Введите адрес видео с YouTube:

Зарегистрируйтесь или войдите с
Информация о видео
7 сентября 2013 г. 3:45:24
00:05:01
Другие видео канала
Phantom 3 and Phantom 4 RC Flight Mode Switch Explained for 3rd Party AppsPhantom 3 and Phantom 4 RC Flight Mode Switch Explained for 3rd Party AppsReversing Motor Rotation with Castle Creations Multirotor ESCs and Castle LinkReversing Motor Rotation with Castle Creations Multirotor ESCs and Castle LinkYes My YouTube Account was Hijacked Today and My Sincere ApologyYes My YouTube Account was Hijacked Today and My Sincere ApologyFireFLY6 Garage Hover Test and Y6 Propeller Configuration w/ NAZA V2FireFLY6 Garage Hover Test and Y6 Propeller Configuration w/ NAZA V2MWC Flip 1.5 RTF and Updated Top Case DesignMWC Flip 1.5 RTF and Updated Top Case Design3DR APM 2.6 Yaw Orientation for Autonomous Flight w/ Bixler Plane3DR APM 2.6 Yaw Orientation for Autonomous Flight w/ Bixler PlaneQAV 250 with Pixfalcon Telemetry and Guided Mode Using Tower for AndroidQAV 250 with Pixfalcon Telemetry and Guided Mode Using Tower for AndroidDroneBlocks with AirSim for Panorama SimulationDroneBlocks with AirSim for Panorama SimulationAPM MinimOSD 3D Printed Case Available for Download on ThingiverseAPM MinimOSD 3D Printed Case Available for Download on ThingiverseQAV400 / QAV500 3D Printed Landing Gear RevisitedQAV400 / QAV500 3D Printed Landing Gear RevisitedAPM 2.5 Hardware in the Loop (HIL) Simulation Testing Stabilize and RTL Flight Modes w/ X-PlaneAPM 2.5 Hardware in the Loop (HIL) Simulation Testing Stabilize and RTL Flight Modes w/ X-PlaneiPower 950kV Brushless Motor Cleaning on TBS Discovery Quadcopter - Working on Vibration ReductioniPower 950kV Brushless Motor Cleaning on TBS Discovery Quadcopter - Working on Vibration Reduction3D Printed Arm Extensions for DJI Flamewheel Frame using Makerbot Replicator 23D Printed Arm Extensions for DJI Flamewheel Frame using Makerbot Replicator 2Recruit Wing with PX4 Telemetry Using Raspberry Pi Zero, GSM Module, and Hologram IoT NetworkRecruit Wing with PX4 Telemetry Using Raspberry Pi Zero, GSM Module, and Hologram IoT NetworkNAZA Lite and TBS Discovery with Turnigy 9XR 3 Flight Modes - GPS Attitude, Manual, & FailsafeNAZA Lite and TBS Discovery with Turnigy 9XR 3 Flight Modes - GPS Attitude, Manual, & FailsafeQAV400 Garage and Backyard Maiden Flight w/ NAZA and Turnigy 9X 3 Flight ModesQAV400 Garage and Backyard Maiden Flight w/ NAZA and Turnigy 9X 3 Flight ModesHoverGames Drone Vibration Analysis w/ PX4 Flight Review - Don't Let Vibrations Kill Your MultiRotorHoverGames Drone Vibration Analysis w/ PX4 Flight Review - Don't Let Vibrations Kill Your MultiRotorDroneMaps FAA Sectional Charts and UAS Facility Maps for Android and iOS Coming SoonDroneMaps FAA Sectional Charts and UAS Facility Maps for Android and iOS Coming SoonHow I Design and 3D Print Parts with Rhino 3D and MakerBot Replicator 2 - The Magic Coin PaddleHow I Design and 3D Print Parts with Rhino 3D and MakerBot Replicator 2 - The Magic Coin PaddleAutonomous Aerial Video of Onion Creek using Pixhawk and ArduCopter 3.2Autonomous Aerial Video of Onion Creek using Pixhawk and ArduCopter 3.2RAD MAVLink Bridge Installation Script for Raspberry PiRAD MAVLink Bridge Installation Script for Raspberry Pi
Яндекс.Метрика