How to Make a Grinding Wheel for the Lathe

Homemade grinding wheel for the lathe so that I can sharpen all my tools, such as woodturning chisels and other kinds of chisels.

Some users have asked me if it's dangerous to press the tools against the wheel while it's turning due to the wheel's canal. After lots of testing I haven't had any problems, as long as the edge of the tool is above the wheel's axis and you push gently. At any rate, it would be a good idea to install a switch so that you can reverse the lathe's motion when necessary.

More info on my website: https://bit.ly/3o30DIs
Plans for this project: https://bit.ly/2HF4NGZ

Where to get some materials and tools used in this project:
Sander and Sandpaper: http://bit.ly/2M2pzRQ
Drill Press Stand: http://bit.ly/2AVahcv
Drill Bits and Router Bits: http://bit.ly/2M8sqbl
Clampling Collar Router: http://bit.ly/2Op7dqZ
Band Saw Accessories: http://bit.ly/2MtOWrT
Threaded Inserts and Screws: http://bit.ly/2ASnUJm
Spray Adhesive and Glue: http://bit.ly/2KGv17H
2 Position ON/OFF Switch/Emergency: http://bit.ly/2OW3rX9
Circular Saw and Accessories: http://bit.ly/2vvcLcj
T-Track and Accessories: http://bit.ly/2AX0inc
Jig Saw and Accessories: http://bit.ly/2M80WmK
Drills & Accessories: http://bit.ly/2KFpj5F
Angle Grinder & Accessories: http://bit.ly/2KFqZMv
Clamps: http://bit.ly/2OW18n1
Lathe Accessories: http://bit.ly/2Op1Zf0

T-shirts and Stickers: http://bit.ly/2RMYDET

Follow:
http://facebook.com/paosonwoodwork
http://instagram.com/paoson_woodworking
http://pinterest.es/Paoson_Woodworking

#woodworking #homemade #diy #grinding #wheel

Видео How to Make a Grinding Wheel for the Lathe канала Paoson Woodworking