How To Make Hand Drill Press From Profile Pipes And Bearings | DIY TOOL

Make easy drill press stand with radial ball bearings and profile pipes. You can make simple linear bearing mechanism which provide easy and rigid linear motion. It cost me about 5-10eur in materials and some free time on weekend and now i can drill straight holes with drill press stand :)
List of materials for drill press : (lengths are specified in the video)
Steel profile pipe 20x20x2,5mm
Steel profile pipe 25x25x2mm
Steel profile pipe 15x15x1,5mm
Steel flat bar 60x10mm
Steel flat bar 25x5mm
Steel flat bar 20x4mm
Steel rod 8mm
M8 Nuts
M8 Nuts with neilon
M8 Bolts
M8 Threaded rod for making longer bolts
M8 washers and spring washers
608.2RS(8*22*7mm) Bearings. They are most common bearing and they are everywhere (skateboards, rollerblades, tools etc...) and of course are very cheap

links to bearings :
https://amzn.to/2vkj7hQ
https://s.click.aliexpress.com/e/_dTExW1n
For base i used U-profile, but you can use plywood or screw to directly to table.
How to make a drill press homemade drill guide diy

Welding machine :
https://s.click.aliexpress.com/e/_dZEf5LD
https://amzn.to/2TEg38D

Welding mask :
https://s.click.aliexpress.com/e/_dWVM7yj
https://amzn.to/32MwZ0R

Tap drills :
https://s.click.aliexpress.com/e/_dSrzHC7
https://amzn.to/2TFpxAi

Metal file:
https://s.click.aliexpress.com/e/_d7VCfkj
https://amzn.to/32PdiFF

Видео How To Make Hand Drill Press From Profile Pipes And Bearings | DIY TOOL канала craftzars