OBD2 using Torque Pro for Android but Not Working?! Must Watch!!

Using my Android Phone i installed the Torque Pro to Connect a Bluetooth Adaptor or OBD so i can monitor some information with the ECU of my vehicle,but at first use it did not work due to some settings which i was able to determine the what is needed to correct this problem......my vehicle is a 2002 Hyundai Starex and it is OBD2 compliant but on the Torque Application in order for it to receive the correct data from the ECU via the OBD2 adaptor the Protocol should be set correctly so here are the steps...

Steps:

- Make sure you have the Torque Pro Application installed on your android phone

- Pair the OBD2 adaptor to your Phone Via Bluetooth first

- Once Paired you can launch Torque Pro App

- You should already have a Profile Created for your vehicle in order to set the correct information for the OBD adaptor to communicate with your Torque Pro App

*** If not Create a Profile of your Vehicle first ***

- On the Main Screen of your Torque Pro enter the settings option and scroll upto the buttom part of the page and look for PREFERED OBD PROTOCOL

- If your not sure which one is the correct Protocol for your Vehicle you contact your car manufacturer to get this information or you can play around with some protocols til you get the rigjt one that has the available features for you to use

- The Protocol will only give you some of the available Sensors base on your ECU or what is being supported from the car manufacturer but it wont change anything on the ECU of your vehicle

Hope this helps......Please Like this Video and Subscribe to help me make some more videos

Видео OBD2 using Torque Pro for Android but Not Working?! Must Watch!! канала Hard Habit