Can I make a vacuum former for 15 eur? (Tali's Visor, Tali Cosplay pt. 2)
Helmet is now available on my ETSY! :D
https://bzqpstore.etsy.com
Hello and welcome to the 2nd part of my Tali Cosplay series (from Mass Effect)!
In the 2nd episode I will show you how I made the visor for the helmet using my homemade, DIY vacuum former for less than 15eur!
0:00 Introduction
0:41 Vacuum former for 15eur?
4:06 Vacuum forming buck
5:54 Forming the visor!
7:20 Dying the visor purple!
9:58 Emergency Induction Port test
The files for 3D printing and vacuum forming can be found on my Thingiverse:
https://www.thingiverse.com/thing:4983479
The electronics diagram and Arduino code can be found on my Arduino Project Hub:
https://create.arduino.cc/projecthub/bzqp/voice-activated-3d-printed-tali-s-helmet-48bfb8?ref=user&ref_id=1479266&offset=0
Tune in for the next episode in which I will start the work on Tali's envirosuit.
Feel free to check some of my other Mass Effect (Legendary Edition) content, like:
3D Printed Tali Helmet (Tali Cosplay pt. 1):
https://youtu.be/fi-FgQYNNqM
Mass Effect N7 Breather Helmet:
https://youtu.be/ULYax2twOSo
N7 Armor cosplay:
https://youtu.be/LEpTTPvJ9J0
Mass Relay scale model:
https://youtu.be/TQ47Xyvorr8
M8 Avenger prop:
https://youtu.be/rjrUQsBJGDU
and many others!
Видео Can I make a vacuum former for 15 eur? (Tali's Visor, Tali Cosplay pt. 2) канала bzqp
https://bzqpstore.etsy.com
Hello and welcome to the 2nd part of my Tali Cosplay series (from Mass Effect)!
In the 2nd episode I will show you how I made the visor for the helmet using my homemade, DIY vacuum former for less than 15eur!
0:00 Introduction
0:41 Vacuum former for 15eur?
4:06 Vacuum forming buck
5:54 Forming the visor!
7:20 Dying the visor purple!
9:58 Emergency Induction Port test
The files for 3D printing and vacuum forming can be found on my Thingiverse:
https://www.thingiverse.com/thing:4983479
The electronics diagram and Arduino code can be found on my Arduino Project Hub:
https://create.arduino.cc/projecthub/bzqp/voice-activated-3d-printed-tali-s-helmet-48bfb8?ref=user&ref_id=1479266&offset=0
Tune in for the next episode in which I will start the work on Tali's envirosuit.
Feel free to check some of my other Mass Effect (Legendary Edition) content, like:
3D Printed Tali Helmet (Tali Cosplay pt. 1):
https://youtu.be/fi-FgQYNNqM
Mass Effect N7 Breather Helmet:
https://youtu.be/ULYax2twOSo
N7 Armor cosplay:
https://youtu.be/LEpTTPvJ9J0
Mass Relay scale model:
https://youtu.be/TQ47Xyvorr8
M8 Avenger prop:
https://youtu.be/rjrUQsBJGDU
and many others!
Видео Can I make a vacuum former for 15 eur? (Tali's Visor, Tali Cosplay pt. 2) канала bzqp
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
M8 Avenger Prop (from Mass Effect)Arduino Christmas TreeSuper Bot Gears! - I made a 3D printed Arduino set for my nieces!Haptolin - my microtonal Arduino MIDI instrument!Voice Activated N7 Helmet (Short)Fully functional Kerbal Helicopter! (with safe landing!)3D Printed Tali Helmet (Tali Cosplay pt. 1)An End Once And For All Piano Cover (from Mass Effect)Suicide Mission piano cover (from Mass Effect)Mass Relay scale model (from Mass Effect)Mass Effect N7 Armor, Commander Shepard cosplayCats Don't Understand Anything (Cover)Homemade N7 Breather Helmet (from Mass Effect)All Was Well by Wintergatan - haptolin coverNothing Else Matters in Minecraft! (made out of note blocks!)Custom omni-tool with retractable omni-blade! (from Mass Effect)Funny bug from Battlefield 3 - "What's up Montes?"Half-Life 2 Dog in Spore!Still Alive on pianoWarLight - War for Poland