Forging a KATANA out of Rusted Iron CHAIN
Well, This Katana took me too long to make and this was not easy to make it such perfect. Alot of People asked me to make Katana so i tried my best to make a perfect Katana Sword as i can.
Overall Sword Length : 35 Inches
Handle Length : 8 Inches
Blade Length : 26 Inches
All the Processes are below of making this beautiful KATANA:
Forging:
It took me almost three days to hand forge an Iron Chain piece into a long Metal Strip and this was one of my hardest forging ever. I don't have a power hammer so i did all the forging with hands and turned a chain piece into an almost 33 - 34 inches long steel strip.
Grinding:
I started some rough grindings of long strip on my Belt sander and turned the strip into a Katana shaped long steel piece. I also hand sanded the edges with the help of file to remove almost all the roughness of the sword.
o. I made the Blood Groove with the help of rotary grinder.
o. The blade bevel was made by my professional angle grinder.
o. Hand Sanded the blade to remove roughness.
Hardness:
There is a professional way to harden a Katana and that is
Covering the whole sword in a Fire Clay (Insulation) Except the blade bevel.After that we put the sword into the fire and heat it to critical temperature. We use oil to Quench the heated sword in it. Now the Bevel is hard and the remaining sword is annealed. Tempering the blade is the best way to increase the Strength, Hardness and Toughness of the sword.
Hibaki:
This piece is traditionally made by forging some copper or brass but we can also make it by casting these metals. And the purpose of hibaki is to hold the Sheath with the handle.
Handle:
The Handle contains three parts.
o. GUARD: I made the guard by using a thick brass sheet, which is roundly turned into a beautiful metal piece that can show a partition between the handle and the remaining sword.
o. Spacer: This is the little metal piece which fits on tang and controls the fittings of the whole handle so nothing should vibrate in handle.
o. Wood: A nice piece of wood uses as a handle of the sword and that could be Wrapped by some soft (leather) strips.
Forging a KATANA out of Rusted Iron CHAIN
#Forging
#RandomHands
Precautions:
Always wear leather gloves while sanding knives. Always keep a First Aid Kit at your work place.
Our Instagram = https://www.instagram.com/random.hands/
Youtube Channel = www.youtube.com/randomhands
Our Facebook = https://www.facebook.com/randomhands
Youtube Subscription:
https://www.youtube.com/channel/UCrI3dm4qgAEV67Jc6797WIA?sub_confirmation=1
Like, Subscribe & SHARE the video also comment your opinions.
Hope you Enjoyed the Video. See you Next time. Subscribe for more interesting projects.
Also Share the video with your friends who might be interested.
Thanks for watching
Best wishes
Random Hands
Видео Forging a KATANA out of Rusted Iron CHAIN канала Random Hands
Overall Sword Length : 35 Inches
Handle Length : 8 Inches
Blade Length : 26 Inches
All the Processes are below of making this beautiful KATANA:
Forging:
It took me almost three days to hand forge an Iron Chain piece into a long Metal Strip and this was one of my hardest forging ever. I don't have a power hammer so i did all the forging with hands and turned a chain piece into an almost 33 - 34 inches long steel strip.
Grinding:
I started some rough grindings of long strip on my Belt sander and turned the strip into a Katana shaped long steel piece. I also hand sanded the edges with the help of file to remove almost all the roughness of the sword.
o. I made the Blood Groove with the help of rotary grinder.
o. The blade bevel was made by my professional angle grinder.
o. Hand Sanded the blade to remove roughness.
Hardness:
There is a professional way to harden a Katana and that is
Covering the whole sword in a Fire Clay (Insulation) Except the blade bevel.After that we put the sword into the fire and heat it to critical temperature. We use oil to Quench the heated sword in it. Now the Bevel is hard and the remaining sword is annealed. Tempering the blade is the best way to increase the Strength, Hardness and Toughness of the sword.
Hibaki:
This piece is traditionally made by forging some copper or brass but we can also make it by casting these metals. And the purpose of hibaki is to hold the Sheath with the handle.
Handle:
The Handle contains three parts.
o. GUARD: I made the guard by using a thick brass sheet, which is roundly turned into a beautiful metal piece that can show a partition between the handle and the remaining sword.
o. Spacer: This is the little metal piece which fits on tang and controls the fittings of the whole handle so nothing should vibrate in handle.
o. Wood: A nice piece of wood uses as a handle of the sword and that could be Wrapped by some soft (leather) strips.
Forging a KATANA out of Rusted Iron CHAIN
#Forging
#RandomHands
Precautions:
Always wear leather gloves while sanding knives. Always keep a First Aid Kit at your work place.
Our Instagram = https://www.instagram.com/random.hands/
Youtube Channel = www.youtube.com/randomhands
Our Facebook = https://www.facebook.com/randomhands
Youtube Subscription:
https://www.youtube.com/channel/UCrI3dm4qgAEV67Jc6797WIA?sub_confirmation=1
Like, Subscribe & SHARE the video also comment your opinions.
Hope you Enjoyed the Video. See you Next time. Subscribe for more interesting projects.
Also Share the video with your friends who might be interested.
Thanks for watching
Best wishes
Random Hands
Видео Forging a KATANA out of Rusted Iron CHAIN канала Random Hands
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Extremely Rusty Guillotine RestorationForging a ZEUS' KNIFE out of a Rusty Leaf SpringFORGING Damascus From STEEL CABLE: Primitive Dagger, Boot/Neck Knife, Bladesmithing And KnifemakingMaking Tanjiro's Katana from [Demon Slayer]Restoration of very rusty construction crane reducer gearbox | Reuse the 3-speed gearboxThis devil wood cutting machine is INCREDIBLE. Amazing huge wood processor & wood sawmill equipmentMake a camping knife from bearing inner raceRusted Spring FORGED into a beautiful Butterfly knifeМало кто знает об этой функции БОЛГАРКИ !!!Making a Katana from a Circular Saw-bladeTurning Rusted BEARING into a Sharp STRAIGHT RAZORTurning a Rusted Bolt into a Shiny NAIL CLIPPERWoodworking Large Extremely Dangerous | Giant Woodturning | Skills Working With Giant RED Wood LatheШАШЛЫК из БИЗОНА. МЯСО БИЗОНА. ЖАРИМ, ВАРИМ. ENG SUBForging A Knife From ScissorsRusty bone grinder - RestorationKNIFE MAKING / CHOPPING KNIFE 수제칼 만들기 #126I Turn a Steel Bolt into a Pocket size PADLOCKA Poor Wood Worker Builds a Car FERRARI APERTA For His Son