Загрузка страницы

Front Load Washer Repair (Samsung or Kenmore): How to replace Spider Arm and/or Bearings

This video will guide you through the process of repairing a Front Load Washing Machine similar to "Kenmore" or "Samsung" brands and shows how to replace the "Spider Arm" assembly and/or the tub "Bearings".

Most front load washers use a spider arm bracket which is commonly made of aluminum while the internal drum and spider arm shaft are made of stainless steel. Galvanic interaction between the two dissimilar metals cause corrosion of the weaker metal (aluminum spider arm) and soapy water (as well as detergent that sticks on the spider arm) supposedly magnifies the problem. Using "Washer Cleaner Tablets" every 30 cycles is supposed to help control this problem but I believe most washers will likely need to have the spider arm replaced every 6-8 years (depending on the frequency of usage) because of the inherent design flaw and issue with Galvanic Corrosion.

The difficulty level of this repair is higher than most simple repairs in that there are many steps and things to take apart, however it is also not that difficult if you follow the steps and take care to properly keep track of all fasteners and parts by putting them aside and labeling where each part/fastener came from so that during the reassembly the proper parts are easier to find and install.

The repair will require some assistance for removing the main tub/drum out of the washer frame and then to reinstall it back into the washer. The rest of the repair can be done by a single person.

Good Luck with your repair.

Vito Mike Casola, P.Eng.
Fix It Yourself.

Видео Front Load Washer Repair (Samsung or Kenmore): How to replace Spider Arm and/or Bearings канала FIX IT Yourself
Показать
Комментарии отсутствуют
Введите заголовок:

Введите адрес ссылки:

Введите адрес видео с YouTube:

Зарегистрируйтесь или войдите с
Информация о видео
25 марта 2020 г. 20:27:13
00:33:34
Яндекс.Метрика