Attaching a 5 inch screen to a Turnigy 9XR radio.
I have attached the quanum DIY goggle screen to the turnigy 9XR radio using SJ4000 camera mounting brackets. Just need to cut flat the middle part of the monitor with a saw and glue the mount which comes with double sided tape. I have used velcro to attach the screen to the goggle and also to attach the receiver to the screen and/or goggle. The screen and the receiver will be powered by the transmitter using the power and ground connection on the futaba port, so when you turn on or off the radio, the screen and receiver will be turned on/off automatically. Total weight without the quanum mask 1280 grams.
Видео Attaching a 5 inch screen to a Turnigy 9XR radio. канала Fly for fun
Видео Attaching a 5 inch screen to a Turnigy 9XR radio. канала Fly for fun
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
EnisiDIY Rudder pedalsDIY Cessna 172 Radio StackBrruti nga ajri (Opoja)Bixler 2 flight and crash (on board SJ4000)DIY Cessna 172 Yoke (CH Yoke mod)My S500 quad with ebay gimbal and SJ4000Brruti ne pranvere (Opoja) - filmime nga ajri :)Cessna 172 Homemade Cockpit - Whiskey CompassTurnigy 9XR + Monitor + Receiver with one Battery :)Violine me motive shqip nga Rahmi YmeriModified Yoke with FS2020My Cessna 172 CockpitQuanum DIY FPV Goggle Mods - changing the lens :)My homemade Cessna 172 Cockpit.DIY Cessna 172 Radio Stack with Mobiflight and Max7219 7 Segment DisplaysS500 over Germia swimming pool.HKPilot Mega 2.7 Master Set - planing a mission tutorialMy S500 Quad :)DIY Cessna 172 Radio Stack