Making a Chinese Wooden Box Bellows for our Blacksmith Forge
Making a Chinese Box Bellows with Mr Chickadee! In this video we show the steps taken to construct a traditional Chinese Style Box Bellows from wood.
This ancient style of Bellows uses a wooden carcase and multiple chambers to deliver a nice concentrated air blast to a blacksmith forge.
All wood is air dried pine, cut here over the last years. Most is shortleaf pine with a bit of white pine for the piston head.
Rough Dimensions as follows:
Total 10"WX16"HX32"L
Air Inlet doors 2"X4"
Air Exit hole 2" Diameter
Lower chamber 3.4"HX24"L
Wall thickness "about" 5/8"
Additional videos on this topic:
https://www.youtube.com/watch?v=X_Jdf5Ab6PM&t=619s
https://www.youtube.com/watch?v=Su3tbYiuqhw&t=107s
https://www.youtube.com/watch?v=oUMt0gTIsCw
Patreon page:
https://www.patreon.com/mrchickadee
Follow me on Instagram:
https://www.instagram.com/mr_chickadee1/
My website :
https://mrchickadee.com/
Видео Making a Chinese Wooden Box Bellows for our Blacksmith Forge канала Mr. Chickadee
This ancient style of Bellows uses a wooden carcase and multiple chambers to deliver a nice concentrated air blast to a blacksmith forge.
All wood is air dried pine, cut here over the last years. Most is shortleaf pine with a bit of white pine for the piston head.
Rough Dimensions as follows:
Total 10"WX16"HX32"L
Air Inlet doors 2"X4"
Air Exit hole 2" Diameter
Lower chamber 3.4"HX24"L
Wall thickness "about" 5/8"
Additional videos on this topic:
https://www.youtube.com/watch?v=X_Jdf5Ab6PM&t=619s
https://www.youtube.com/watch?v=Su3tbYiuqhw&t=107s
https://www.youtube.com/watch?v=oUMt0gTIsCw
Patreon page:
https://www.patreon.com/mrchickadee
Follow me on Instagram:
https://www.instagram.com/mr_chickadee1/
My website :
https://mrchickadee.com/
Видео Making a Chinese Wooden Box Bellows for our Blacksmith Forge канала Mr. Chickadee
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
TREADLE LATHECrazy Wood Bending Machines you didn’t know Exist3 ways to make blacksmith tongsBuilding our Blacksmith forge from a stone chimney built 150 years agohewing a white oak 6"x6"How to build a tiny masonry heater for the woodshopJapanese style hewing a curvy pine log with new bearded axe and draw knifeStone FoundationBuilding Your Own Forge Blower (Japanese Fuigo)SOTW #17 - Glass Top Fuigo - What's going on in there?Traditional Korean floor 대청마루 ( daecheongmaru) PART I -a wooden floor without nails, screws or glueHand Carving a Stone Anvil BaseFully scribed Japanese timber frame sillsSIMPLE AIR BLOWERHow to Make a Simple Propane Forge for Blacksmithing | I Like To Make StuffMaking This Solid Wood Box - Woodworking - Box JointsBuilding a Hobbit style root cellar with stone Part IMaking a wood brick floor for our blacksmith shopBlacksmithing - Forging a bearded axeINSANE GRAIN DOVETAIL BOX