DIY Murphy Table

Here is the cabinet/foldable table I made for my office. I got a new sofa for my office which made me move my workbench to our garage. I needed a good solution to have a table that tucks away and also holds some storage for my crafts. Here is a list of the material with measurements of the pieces I used.

Materials
Total Plywood: 4’ x 8’ (3/4” thickness)
https://www.homedepot.com/p/18mm-Sande-Plywood-3-4-in-Category-x-4-ft-x-8-ft-Actual-0-709-in-x-48-in-x-96-in-454559/203414066
Frame
Top: 30” x 8”
Bottom: 30” x 8”
Right Side: 36” x 8”
Left Side: 36” x 8”

Table Top: 31” x 36” (3/4” thickness)

Legs/Base
Top: 24” x 3.5”
Bottom: 24” x 3.5”
Right Side: 36” x 3.5”
Left Side: 36” x 3.5”
Wood Cover: 31” x 36” (1/4” thickness)
https://www.homedepot.com/p/Sandeply-5-2mm-Sande-Plywood-1-4-in-Category-Common-1-4-in-x-4-ft-x-8-ft-Actual-0-205-in-x-48-in-x-96-in-479023/203414042

Interior Shelf: 30” x 6.5” (3/4” thickness)

Kreg Pocket Hole Jig
https://www.homedepot.com/p/Kreg-Pocket-Hole-Jig-KPHJ320/310410050
#8 x 1-1/4 in. Square Drive Round Head Zinc Coarse Pocket-Hole Screw
https://www.homedepot.com/p/Kreg-8-x-1-1-4-in-Square-Drive-Round-Head-Zinc-Coarse-Pocket-Hole-Screw-250-Pack-SML-C125-250/300680118
1-1/16 in. x 12 in. Bright Nickel Continuous Hinge
https://www.homedepot.com/p/Everbilt-1-1-16-in-x-12-in-Bright-Nickel-Continuous-Hinge-14649/203339971
Bright Brass Lid Support Left Hand Hinges
https://www.homedepot.com/p/Everbilt-Bright-Brass-Lid-Support-Left-Hand-Hinges-19834/204485795
Bright Brass Lid Support Right-Hand Hinges
https://www.homedepot.com/p/Everbilt-Bright-Brass-Lid-Support-Right-Hand-Hinges-19844/204485796
Leather Handle
https://www.ikea.com/us/en/p/oesternaes-leather-handle-tanned-leather-40348895/
LED spotlights
https://www.ikea.com/us/en/p/ledberg-led-spotlight-white-40430828/

Blog: http://www.flowersandfolk.com/
Instagram: https://www.instagram.com/flowersandfolk

Видео DIY Murphy Table канала Cristina Ramirez