ReveD RS-ST Servo Install in a Sakura D5S | Unboxing | Install | Test | Review

The ReveD RS-ST servo and RC-PGC USB programmer installed in our Sakura D5S chassis!

This is not a direct bolt in as the Sakura chassis truly only accepts full low-profile servos. Although this RS-ST is not as tall as a full-size servo...it is just too tall to fit without some changes.

By countersinking the shock mount holes, and adding some small spacers, I created just enough room to get the servo in there...and the body still fits!!

Having the RC-PGC USB programmer was a first for me. I have not had a programmable servo before.
This servo allowed me to change multiple settings in the servo, and I go through each on in detail for you. Changing them and then testing them to see if I can notice the difference in how it performs.

Have any questions about this? Let me know down below!

Get your own ReveD RS-ST servo and programmer here: http://supergdrift.com/store/product/rs-st-rwd-drift-hi-torque-servo-reve-d/

Get previews and insights by following us on Facebook: www.facebook.com/RoadsideRC

Please subscribe, comment, and like!

Music provided by T2NATE - go check out his other work: https://www.youtube.com/channel/UCEZgrb2mO0BF1-HerEa1FCg

Видео ReveD RS-ST Servo Install in a Sakura D5S | Unboxing | Install | Test | Review канала Roadside RC