Quadcopter controlled with a 4G mobile connection, Emlid Navio+, Raspberry Pi 2 B
A short flight demo of my new quad. The connection is 100% cellular, so radio range is practically unlimited. The control latency is around 100 ms, video latency around 200-500ms depending on video quality and connection speed. The quad frame is IronMan 650, RCTimer 5010 360kv Motors, 17x5.5 props, 12 000 mah battery (2xGEB8043125 4S1P). Flight time around 40-50 minutes. The 4G modem on the quadcopter is the Huawei e8278. (There was a little wind)
Видео Quadcopter controlled with a 4G mobile connection, Emlid Navio+, Raspberry Pi 2 B канала Ole Gulbrandsen
Видео Quadcopter controlled with a 4G mobile connection, Emlid Navio+, Raspberry Pi 2 B канала Ole Gulbrandsen
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
GSM 4G telemetry and video - unlimited range for your droneInternet connected drone and video streaming over 4G using Raspberry Pi 3Connecting Raspberry Pi w/ Pixhawk and Communicating via MAVLink ProtocolBreaking My Long Range FPV Distance RecordGSM 3G/4G internet enabled quadcopter controller board first review4G (LTE) Telemetry and Control of Pixhawk using Pi3Second flight test, 13x8 props, Raspberry Pi 2, Navio2, 4G mobile connection10 NEW DRONE Inventions You Must See5 Best Personal Aircraft - Passenger Drones and Flying Cars ▶️ 1Arduino vs. Raspberry Pi - Which is best? | AddOhms #7How we built a high altitude balloon with a Raspberry Pi | The HACT missionMini Drone Teardown💰9 Ways to Make MONEY with Your DRONERaspberry Pi Zero: GPIO PinsDrone Control Over 4g Internet Unlimited Telemetry Apm/Pixhawk With Andruav!!RC Plane Electronics & Connections for Beginners (Hindi)THE 7 Best Long Range Drones in 2020 [by distance and price]What's the best 5" FPV drone to start with? Emax, Eachine, DJI?Flying a quadcopter with a Joystick in Mission PlannerI Built a REAL Nerf Attack Drone!