How to remove runs in automotive clearcoat quickly, easily and safely.
Musclecarworkshop.com
Follow us on Instagram: Musclecarworkshop
Process to remove clearcoat runs:
1. After clearing your vehicle, if you notice a run, spray 2-3 more coats of clear over it waiting approximately 5 minutes between coats to increase millage.
2. Fully cure the run with a heat lamp or out in the sun for a day.
3. Wipe off area to be sanded with wax and grease remover or soapy water and wipe dry.
4. Cut a plastic body filler spreader to about 2.5 inch or less as needed for your situation and apply p320 grit dry sticky paper to it.
5. Sand across the run or sag with firm pressure varying direction until the run is removed. (For best results after this step apply heat lamp or Sun again to make sure the area where the run was, is filly cured through)
6. Use p500 dry paper on a straight acrylic block, aluminum or a similar hard straight block over the run area to further flatten the run and remove the 320 scratches.
7. Proceed with 800 or 1000 grit wet/dry paper. I prefer this step wet with a firm rubber block such as a Dura block.
8. Finish the wet sanding process with 1500, 2000, 2500, 3000 (3M trizact or similar product. No need to use a block with these grits since the panel will have been cut and blocked straight in step 7. I use 6" 3000 trizact with a da sander. 5000 trizact can also be used to help achieve the ultimate show finish.
9. Your clear is now ready for polishing. I use 3D products for best results (3Dproducts.com) Their wool pad with AAT501 followed by AAT502 on their black foam pad. Use AAT505 with a soft foam pad and 6" DA polisher. Last step is Adams polishes Americana wax by hand application.
Видео How to remove runs in automotive clearcoat quickly, easily and safely. канала MuscleCarWorkshop
Follow us on Instagram: Musclecarworkshop
Process to remove clearcoat runs:
1. After clearing your vehicle, if you notice a run, spray 2-3 more coats of clear over it waiting approximately 5 minutes between coats to increase millage.
2. Fully cure the run with a heat lamp or out in the sun for a day.
3. Wipe off area to be sanded with wax and grease remover or soapy water and wipe dry.
4. Cut a plastic body filler spreader to about 2.5 inch or less as needed for your situation and apply p320 grit dry sticky paper to it.
5. Sand across the run or sag with firm pressure varying direction until the run is removed. (For best results after this step apply heat lamp or Sun again to make sure the area where the run was, is filly cured through)
6. Use p500 dry paper on a straight acrylic block, aluminum or a similar hard straight block over the run area to further flatten the run and remove the 320 scratches.
7. Proceed with 800 or 1000 grit wet/dry paper. I prefer this step wet with a firm rubber block such as a Dura block.
8. Finish the wet sanding process with 1500, 2000, 2500, 3000 (3M trizact or similar product. No need to use a block with these grits since the panel will have been cut and blocked straight in step 7. I use 6" 3000 trizact with a da sander. 5000 trizact can also be used to help achieve the ultimate show finish.
9. Your clear is now ready for polishing. I use 3D products for best results (3Dproducts.com) Their wool pad with AAT501 followed by AAT502 on their black foam pad. Use AAT505 with a soft foam pad and 6" DA polisher. Last step is Adams polishes Americana wax by hand application.
Видео How to remove runs in automotive clearcoat quickly, easily and safely. канала MuscleCarWorkshop
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![How to fix Runs in paint.](https://i.ytimg.com/vi/7MnO_vDJREY/default.jpg)
![ULTIMATE TRICK How to Color Sand & Cut A LARGE Run from Clearcoat on SNOOP DOGG 1976 Cadillac ...](https://i.ytimg.com/vi/qaliKpOAUCI/default.jpg)
![Removing Orange Peel the easy way using Farécla G3 and 3m machine polisher](https://i.ytimg.com/vi/5FVAoYFs45c/default.jpg)
![Car Painting: How to Spray Clearcoat](https://i.ytimg.com/vi/8H443QJ1ycA/default.jpg)
![How to remove runs in clear coat/Monte SS update](https://i.ytimg.com/vi/pNNgvUUyI2I/default.jpg)
![Sherwin-Williams Automotive - Fix that Run](https://i.ytimg.com/vi/-WnI6lLIq9I/default.jpg)
![How to Setup your Paint Gun to Spray a Car Guide!](https://i.ytimg.com/vi/pNfjSFyGYiM/default.jpg)
![Professional wet/dry sanding and polishing tutorial. 3m Trizact system, EX Compound](https://i.ytimg.com/vi/-oFd43vnUOs/default.jpg)
![When to Polish vs Compound vs Wetsand](https://i.ytimg.com/vi/cHEpqYGuUHI/default.jpg)
![How to Repair Damaged Clear Coat - Auto Body Repair Hacks Revealed](https://i.ytimg.com/vi/lbSIjsUeWZQ/default.jpg)
![Simple Peeling Clear Coat Fix Watch This! (Order at lukatdetail.com ) 505-304-8652](https://i.ytimg.com/vi/jtvbsjnYzGE/default.jpg)
![Amazing Trick for Removing a Paint Run](https://i.ytimg.com/vi/mn6nPky0HGs/default.jpg)
![Removing a run in clear coat on a fresh paint job.](https://i.ytimg.com/vi/CeKUMgAC_v8/default.jpg)
![How to sand and buff your clear](https://i.ytimg.com/vi/GC5ApaGLYrQ/default.jpg)
![The Secrets Behind Spraying Glossy Paint on a Hood!](https://i.ytimg.com/vi/2ko2flnOOqw/default.jpg)
![Fixing a PAINT RUN with Glaze Putty!](https://i.ytimg.com/vi/6dc8LbKieec/default.jpg)
![How to remove a run - removing clear coat runs](https://i.ytimg.com/vi/bGHSiRbH3Us/default.jpg)
![How to Polish Out Clearcoat Defects](https://i.ytimg.com/vi/GrLr30PPJAU/default.jpg)
![Dust Nibs & Runs](https://i.ytimg.com/vi/_0iG86Q8obo/default.jpg)
![WILL THIS BUFF OUT?](https://i.ytimg.com/vi/yAOsEAF8hng/default.jpg)