LiitoKala Lii-PD4 battery charger charging batteries test
In this video we check out the LiitoKala Lii-PD4 battery charger.
This is a 4 cell charger that can tape input of 110 to 240 volts AC or 12V DC current. It can output up to 2 amps of charging current to a single cell battery or 1 amp to 2 cells or 500mA to 4 cells.
-------------------------------------------------------------------------------------------------------------
FEATURES:
- Display turns off in 30 seconds, but will turn on when a battery is full.
- Charge current is 2A in slot #4 when only this slot is used for LiIon.
- With 1 or 2 cells the charge current is 1A only exception is above.
- With 3 or 4 cells the charge current is 0.5A
- Charger will not increase current when some cells are full, i.e. it is possible to reliable charge 3-4 cells at 0.5A
- Power consumption when idle without batteries is 0.2 watt when display is off.
- Below 0.3V the charger will not recognize a battery and charge with about 3mA.
- Between 0.3V and 2V the charger assumed NiMH
- Above 2V the charger assume LiIon
- When charge is finished the charger will charge with 0.6mA for LiIon.
- Charger will not restart if voltage drops
- Charge will restart charging after power loss, or battery insertion.
- When not connected to power it will drain about 1.2mA from a LiIon battery and 0.3mA from a NiMH battery.
- Voltmeter will show up to 0.3V wrong below 1V, above it is usual within 0.01V
- Minimum reading on voltmeter is 0.58V
- Voltmeter stops updating when charging terminates.
More Product Specs
Product name: Liitokala Lii-PD4 LCD 3.7V NiMH Lithium Battery Charger US/EU Plug
Brand: LiitoKala
Model: Lii-PD4
Input: AC cable 110V-240V 5060Hz/ DC 12V 1A (Selective)
Output Currnt (Li-ion): 500mA x4/ 1000mA x2/ 2000mA x1
Output Currnt (Ni-MH): 500mA x4/ 1000mA x2
Output Voltage: 1.48V/ 4.2V/ 3.6V/ 4.35V
Standby Current: ≤15mA
Constant Voltage Cut-off Current: ≤100mA
Size: 147mm(L) x 100mm(W) x 37mm(H)
For Battery: 1.2V Ni-MH/ Ni-CD to 3.7V Li-ion/ 3.2V Li-Fe/ 3.8V Li-ion battery.
For AA AAA SC 18650/ 26650/ 21700/ 18490/ 17670/ 14500/ IMR 10440
Видео LiitoKala Lii-PD4 battery charger charging batteries test канала Amped and Volted
This is a 4 cell charger that can tape input of 110 to 240 volts AC or 12V DC current. It can output up to 2 amps of charging current to a single cell battery or 1 amp to 2 cells or 500mA to 4 cells.
-------------------------------------------------------------------------------------------------------------
FEATURES:
- Display turns off in 30 seconds, but will turn on when a battery is full.
- Charge current is 2A in slot #4 when only this slot is used for LiIon.
- With 1 or 2 cells the charge current is 1A only exception is above.
- With 3 or 4 cells the charge current is 0.5A
- Charger will not increase current when some cells are full, i.e. it is possible to reliable charge 3-4 cells at 0.5A
- Power consumption when idle without batteries is 0.2 watt when display is off.
- Below 0.3V the charger will not recognize a battery and charge with about 3mA.
- Between 0.3V and 2V the charger assumed NiMH
- Above 2V the charger assume LiIon
- When charge is finished the charger will charge with 0.6mA for LiIon.
- Charger will not restart if voltage drops
- Charge will restart charging after power loss, or battery insertion.
- When not connected to power it will drain about 1.2mA from a LiIon battery and 0.3mA from a NiMH battery.
- Voltmeter will show up to 0.3V wrong below 1V, above it is usual within 0.01V
- Minimum reading on voltmeter is 0.58V
- Voltmeter stops updating when charging terminates.
More Product Specs
Product name: Liitokala Lii-PD4 LCD 3.7V NiMH Lithium Battery Charger US/EU Plug
Brand: LiitoKala
Model: Lii-PD4
Input: AC cable 110V-240V 5060Hz/ DC 12V 1A (Selective)
Output Currnt (Li-ion): 500mA x4/ 1000mA x2/ 2000mA x1
Output Currnt (Ni-MH): 500mA x4/ 1000mA x2
Output Voltage: 1.48V/ 4.2V/ 3.6V/ 4.35V
Standby Current: ≤15mA
Constant Voltage Cut-off Current: ≤100mA
Size: 147mm(L) x 100mm(W) x 37mm(H)
For Battery: 1.2V Ni-MH/ Ni-CD to 3.7V Li-ion/ 3.2V Li-Fe/ 3.8V Li-ion battery.
For AA AAA SC 18650/ 26650/ 21700/ 18490/ 17670/ 14500/ IMR 10440
Видео LiitoKala Lii-PD4 battery charger charging batteries test канала Amped and Volted
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Liitokala Lii-600 Unboxing, Overview & Comparison (to Lii-500 & 500s)EEVblog #176 - Lithium Ion/Polymer Battery Charging TutorialLiitoKala Lii-PD4 Battery Charger Review, purchased from AliexpressXtar MC4 Li-ion Charger: Review & TestDIY: How to revive a dead 18650 (or any) Li-ion battery cellLiitoKala Engineer Lii-300 Battery Charger #Review - 12v Solar ShedThe LiitoKala Lii-500S is more than just a battery charger!🔋 Battery amp-hour, watt-hour and C rating tutorialNicehash Bitcoin Mining Project - Free BTC Giveaway - Part 3 ResultsChargeur de piles LiitoKala modèle Lii-PD4Mining Bitcoin Live with Nicehash CPU Xeon E5 2650 v2 & GPU GTX 1650 Stats Test #1Lithium Battery Longevity: Double or Quadruple the Life of Your Lithium BatteryDIY: Ni-Cd To Lithium Battery Conversion By Using 18650 CellsUpgrade a NiCd Charger to a Lithium Charger for less than $6How to (voltage drop) test a starter motor circuitEEVblog #35 2of2 - NiMH and NiCd Battery Charging TutorialREVIEWING: 5 x Cheap Lithium Ion 18650 Battery Cell Charger Capacity | Li-Ion | Vape | Best | 2020LIITOKALA LII-600 CARGADOR TEST DIGITAL CON PANTALLA TÁCTIL. #lithiumtesterlii600 #LiitoKala lii-500S LCD Smart Battery Charger Unboxing and TestBattery Chargers: Top Picks