MinNaza OSD Maiden Flight adjusting gains remotely with knob on TX.

Setup NAZA to control gains remotely by connecting Aux3 on RX to X2 on NAZA
then adjust gains while flying and saved the settings.

Neewer Alien X frame
DJI Naza M Lite with GPS (if you ever get 5 satilites-
The NAZA GPS does not play well with 1280MHz video transmitter)

MinimOSD with MinNaza mods (See my MinNaza videos).
980kvm 2212 Sunny Ski Motors
Turnigy Multistar 30 Amp Multi-rotor Brushless ESCs 2-4S (OPTO)
Battery Turnigy 3000mAh 4S 30C
HQProps Carbon Mix HQP010209500 and HQP010209501
Range Video 2 Channel 1258/1280 MHz 800mW video transmitter
Orange RX 8 channel Receiver w/ 2 antennas + 2 sat sockets
Spektrum DX8 RC Transmitter.

MinNaza OSD Project 3 Part series.
https://www.youtube.com/watch?v=k9r_Yu9U5rk

-~-~~-~~~-~~-~-
Please watch: "Runcam Owl Plus Camera with Low Light PL0075 Lens Installed for Night FPV RC Flying"
https://www.youtube.com/watch?v=J5CrWcX20P8
-~-~~-~~~-~~-~-

Видео MinNaza OSD Maiden Flight adjusting gains remotely with knob on TX. канала Dave Merc Productions