How to Install Bosch URF7 Parking Sensors - 2001 Ford Focus Mk1
How to retrofit new BOSCH Park Pilot URF7 Parking Sensors on a 2001 Ford Focus Mk1, that already had old BOSCH Park Pilot sensors.
Here I walk you guys trough the whole process of how to change the Parking Sensors, including removing the rear bumper, interior plastic trim pieces, wiring (diagram included) and the modification to the old parts you need to reuse.
Social media Links: https://www.instagram.com/n33sworkshop/
Other Useful links:https://dokumen.tips/documents/bosch-park-pilot-tm-installation-instructions.html?page=1
http://navody.ford-focus.cz/Ford_Focus_manualy/mk1/FF1_el_schema.pdf
Parts you'll need:
-Set of Bosch Park Pilot URF7 0263 009 565
-Insulated spade or butt connectors
-Zip ties
Tools you'll need:
-A safe way to lift the car
-T25 torx
-10mm/13mm socket
-PH2/PZ2/Flat head screwdriver
-box cutter/x-acto knife
-wire cutter
-wire crimper (insulated spade connectors)
-Measuring tape
-Scotch tape
-Multimeter
-Paint (if you want to paint the sensors)
-Step drill D26mm
-Hole saw D35mm
-Drill D6mm (if you want to drill holes for the main module)
-Cordless drill
-Marker/Sharpie
-Scrissors
Music from:1.8 TDdi
Disclaimer: Due to factors beyond the control of N33s Workshop, I cannot guarantee against improper use or unauthorized modifications of this information. N33s Workshop assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. N33s Workshop recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of N33s Workshop, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not N33s Workshop.
Видео How to Install Bosch URF7 Parking Sensors - 2001 Ford Focus Mk1 канала N33s Workshop
Here I walk you guys trough the whole process of how to change the Parking Sensors, including removing the rear bumper, interior plastic trim pieces, wiring (diagram included) and the modification to the old parts you need to reuse.
Social media Links: https://www.instagram.com/n33sworkshop/
Other Useful links:https://dokumen.tips/documents/bosch-park-pilot-tm-installation-instructions.html?page=1
http://navody.ford-focus.cz/Ford_Focus_manualy/mk1/FF1_el_schema.pdf
Parts you'll need:
-Set of Bosch Park Pilot URF7 0263 009 565
-Insulated spade or butt connectors
-Zip ties
Tools you'll need:
-A safe way to lift the car
-T25 torx
-10mm/13mm socket
-PH2/PZ2/Flat head screwdriver
-box cutter/x-acto knife
-wire cutter
-wire crimper (insulated spade connectors)
-Measuring tape
-Scotch tape
-Multimeter
-Paint (if you want to paint the sensors)
-Step drill D26mm
-Hole saw D35mm
-Drill D6mm (if you want to drill holes for the main module)
-Cordless drill
-Marker/Sharpie
-Scrissors
Music from:1.8 TDdi
Disclaimer: Due to factors beyond the control of N33s Workshop, I cannot guarantee against improper use or unauthorized modifications of this information. N33s Workshop assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. N33s Workshop recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of N33s Workshop, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not N33s Workshop.
Видео How to Install Bosch URF7 Parking Sensors - 2001 Ford Focus Mk1 канала N33s Workshop
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Retrofit OEM Ambient LED Lighting - Ford Focus Mk1Retrofit OEM Alarm System - Ford Focus Mk1I surprised a friend with a Set of KW Coilovers!How to Change Spark Plugs - Ford Focus Mk1 1.6 Zetec SEHow to Retrofit Xenon Headlights - Ford Focus Mk1How to Retrofit an Auto Dimming Mirror - Ford Focus Mk1How to Install Heated Seats - Ford Focus Mk1How to Retrofit a Power Sunroof - Ford Focus Mk1Boslla H4 Headlight Bulb in Ford Focus MK1How do I 3D print car parts?Cleaning PCV System Air Oil Separator - 2001 Ford FocusHow to Install extra Interior Lights - 2001 Ford FocusHow to Bleed Brakes - 2001 Ford FocusHow to Install Sunglass Holder - 2001 Ford FocusFabricating a Oil Pan ShieldReplacing Shock Absorbers - Seat Ibiza 2012How to Replace Front Shock Absorbers - 2001 Ford FocusHow to Replace Rear Shock Absorbers - 2001 Ford FocusHow to Change Engine Coolant - 2001 Ford FocusHow to Restore Headlights - 2001 Ford Focus