Micros Swiss All Metal Hotend
This video address concerns about the quality and reliability of the Micro Swiss All Metal Hotend. Specifically, it tests the ability of this high-temperature hot end to print regular PLA at regular temperatures. When you read the comments about the MicroSwiss Hotend some users comment that it tends to jam when using low-temperature filament such as PLA and that stringing is an issue with these filaments. I have evaluated both of these potential issues and report on my results.
While I tested the Micro Swiss Hotend on my Creality Ender 5 I believe my results will hold across the Creality line of printers. The test prints were sliced with Cura and printed in Hatchbox PLA and Matterhacker Build PLA.
The Ender 5 Upgrades on the printer used for these tests include a SeeMeCNC EZR Struder Extruder Kit and a Capricorn Bowden tube.
After watching the video please feel free to comment. All comments about this topic are welcome. Let's continue to learn together.
Irv
---
The following links are to products I have used, reviewed, or evaluated for the DrVax community. Some of the links below are affiliate links that provide commissions, at no cost to you, and help support the DrVax video production, purchase of products for reviews, lab, forum, and web site.
I have reviewed the following printers or similar printers:
➡︎ https://kit.co/drvax/3d-printers-reviewed-on-drvax-youtube-channel
These are some of the tools I use for 3d printing day-to-day:
➡︎ https://kit.co/drvax/basic-3d-printing-tools
I have reviewed or used the following 3d printer upgrades:
➡︎ https://kit.co/drvax/3d-printer-upgrades
Here are the 3d printer filaments I use to evaluate prints, software, and techniques:
➡︎ https://kit.co/drvax/3d-printing-filament-i-use-at-drvax
I will be covering basic electronics and software in future DrVax segments and here are the products I am using:
https://kit.co/drvax/software-and-electronic-kits
Some of the Woodworking products I use:
https://kit.co/drvax/drvax-woodworking-tools-and-supplies
---
** Affiliate disclaimer: some of the above links in my videos may be affiliate links, which generate a sales commission for me. Your price is the same or less than if you go to the site directly. These sales commissions help to support the DrVax channel. (https://drvax.com)
** DrVax and the DrVax videos are Copyright Cogitations, LLC. (https://cogitations.com)
** Equipment used in the DrVax videos has the potential to cause injury if misused. Use all equipment and tools at your own risk and follow all manufacturer's safety recommendations.
** Cogitations, LLC licenses all music used in the DrVax videos from Epidemic Sound. Cogitations, LLC uses only authorized or open source clip art and third party images. Images
Видео Micros Swiss All Metal Hotend канала DrVax
While I tested the Micro Swiss Hotend on my Creality Ender 5 I believe my results will hold across the Creality line of printers. The test prints were sliced with Cura and printed in Hatchbox PLA and Matterhacker Build PLA.
The Ender 5 Upgrades on the printer used for these tests include a SeeMeCNC EZR Struder Extruder Kit and a Capricorn Bowden tube.
After watching the video please feel free to comment. All comments about this topic are welcome. Let's continue to learn together.
Irv
---
The following links are to products I have used, reviewed, or evaluated for the DrVax community. Some of the links below are affiliate links that provide commissions, at no cost to you, and help support the DrVax video production, purchase of products for reviews, lab, forum, and web site.
I have reviewed the following printers or similar printers:
➡︎ https://kit.co/drvax/3d-printers-reviewed-on-drvax-youtube-channel
These are some of the tools I use for 3d printing day-to-day:
➡︎ https://kit.co/drvax/basic-3d-printing-tools
I have reviewed or used the following 3d printer upgrades:
➡︎ https://kit.co/drvax/3d-printer-upgrades
Here are the 3d printer filaments I use to evaluate prints, software, and techniques:
➡︎ https://kit.co/drvax/3d-printing-filament-i-use-at-drvax
I will be covering basic electronics and software in future DrVax segments and here are the products I am using:
https://kit.co/drvax/software-and-electronic-kits
Some of the Woodworking products I use:
https://kit.co/drvax/drvax-woodworking-tools-and-supplies
---
** Affiliate disclaimer: some of the above links in my videos may be affiliate links, which generate a sales commission for me. Your price is the same or less than if you go to the site directly. These sales commissions help to support the DrVax channel. (https://drvax.com)
** DrVax and the DrVax videos are Copyright Cogitations, LLC. (https://cogitations.com)
** Equipment used in the DrVax videos has the potential to cause injury if misused. Use all equipment and tools at your own risk and follow all manufacturer's safety recommendations.
** Cogitations, LLC licenses all music used in the DrVax videos from Epidemic Sound. Cogitations, LLC uses only authorized or open source clip art and third party images. Images
Видео Micros Swiss All Metal Hotend канала DrVax
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Creality Ender all Metal Micro Swiss Hot End Upgrade and PID TuningThe Biggest Pain In 3D Printing - Hotend Clogs & JamsComplete Guide to Filament for FDM 3d PrintersRant - Microswiss Should Be Concerned at how GOOD the Clones are Getting. Here's Why.Micro Swiss Direct Drive for the Ender 5 PlusHow to 3d Print PETG Reliably and SafelyEnder 3 Micro Swiss all metal hot endCheap All Metal Hotend for your Ender 3 UPDATE!First 24 Upgrades & Mods for my Ender 3 ProSimple HOTEND FIX for Creality Ender 3, CR-103d Printing without Stringing and Understanding 3d Print FailuresBuild your own 3D Printer: Which hotend to pick!GAME OVER For Hotend/Extruder Design? - The Biqu H2 Direct Drive Hemera AlternativeMicro Swiss All-Metal Hotend: Details and Installation (Ender 5)All metal hot end for the Ender 3 for $7. Part 1, tips, trips and lessons learned.Creality Hot End Failure Modeling How to Fix, Assemble CR 10 Ender 3 5 Mini T3DPTroubleshooting 3d Printing ProblemsHero Me Gen 5: The ultimate part cooling fan duct for Creality 3D printers?3d Printing Carbon Fiber Nylon For Beginners (Ender 3)Could it be ILLEGAL to buy this hotend?!