How-To: Wire Your RC Car For A Clean Factory Look
In this video Nick shows you how to wire your RC car for a clean factory look. He will be installing a Reedy ESC with all black 13awg wire and a shortened lead, Reedy servo also with a shortened lead, and a motor cooling fan. In this how-to Nick works on an RC10 B6.1, but the methods used can be adapted to any RC vehicle.
WARNING: When ever you use a soldering iron, use it in a well ventilated area with a fan to help pull away the fumes from you. Always wear eye protection and if you’re a minor, please ask your parent or guardian for permission and/or assistance. Some of the techniques in this video may be dangerous. Some of the methods shown in the video may also void the warranty on your electronic components. Perform these modifications at your own risk.
Jump To:
00:16 Safety
00:40 Tools & Items Needed
02:07 Installing Motor
02:40 Prepping ESC
03:25 Measuring and Prepping ESC Wires
05:30 Soldering Wires and Capacitor to ESC
08:02 Shortening ESC Receiver Wire
12:55 Installing Sensor Wire and ESC
15:43 Wiring Motor
19:45 Wiring Battery Connectors
24:49 Steering Servo
26:00 Installing Motor Cooling Fan
34:30 Wrapping It Up
Visit our website: https://www.AssociatedElectrics.com/
Видео How-To: Wire Your RC Car For A Clean Factory Look канала TeamAssociatedRC
WARNING: When ever you use a soldering iron, use it in a well ventilated area with a fan to help pull away the fumes from you. Always wear eye protection and if you’re a minor, please ask your parent or guardian for permission and/or assistance. Some of the techniques in this video may be dangerous. Some of the methods shown in the video may also void the warranty on your electronic components. Perform these modifications at your own risk.
Jump To:
00:16 Safety
00:40 Tools & Items Needed
02:07 Installing Motor
02:40 Prepping ESC
03:25 Measuring and Prepping ESC Wires
05:30 Soldering Wires and Capacitor to ESC
08:02 Shortening ESC Receiver Wire
12:55 Installing Sensor Wire and ESC
15:43 Wiring Motor
19:45 Wiring Battery Connectors
24:49 Steering Servo
26:00 Installing Motor Cooling Fan
34:30 Wrapping It Up
Visit our website: https://www.AssociatedElectrics.com/
Видео How-To: Wire Your RC Car For A Clean Factory Look канала TeamAssociatedRC
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
HOW TO REBUILD A RC CAR || Cleaning tips, wiring, solderingA New Champion: Team Associated's History In The 4WD Class (FULL VIDEO)The Charlie Show /// Episode 56 /// XR10 Pro ESC and V10 G2 motor install.RC Soldering Basics - What You Need + How To Solder Wires & Connectors - Get Into RC | RC Driver7 Ways You're Destroying Your R/C CarBuilding an RC KIT - Tips and Tricks - Wrench w/Rich EP1B6.1 Factory Lite MIP Puck™ SystemThe Charlie Show /// Episode 6 /// ESC and Motor WiringHow to Make a Faster Race Car - Stock 13.5T & 17.5T RacingPracticing like a Pro - Spencer RivkinHow to: Paint an RC Body ShellTeam Associated B6.3 Full Review 2wd race buggyMaking a DRIVETRAIN and Installing the Micro V4 ENGINE on the RC Car!The Charlie Show /// Episode 117 /// XR10 Pro 160 G2Gluing your 1:10 Tires - Spencer RivkinHow-To: Set Your Slipper ClutchMy first race at OCRC was INSANE!! Surf City Classic 2020SHORTEN WIRES FOR A FACTORY LOOK – RC CAR Tips & How to From The Workshop10 most common RC mistakes!HOW TO SHORTEN WIRES || Servo wires, ESC Wires