Using Super Glue and Baking Soda to Repair a Plastic Switch Plunger

I used the super glue and baking soda trick to repair a plastic switch mechanism.
I first experimented with scrap wood to get a feel for the process. It would be best to start with the baking soda and then add super glue drops as needed.
Various fillers may be added to help strengthen the bond further, and a small mold can be set up to build up the structure, then removed almost immediately when it sets.
The result can be sanded or carved into the desired shape.

CA / Super Glue Info
https://en.wikipedia.org/wiki/Cyanoacrylate
http://scienceline.ucsb.edu/getkey.php?key=459
https://www.mandolincafe.com/forum/threads/132729-epoxy-or-superglue

Workbench equipment I regularly use:
946C Solder Hot Plate 200mm x 200mm https://www.banggood.com/custlink/K3DyiNZy0l
ANENG AN8008 True RMS Multimeter https://www.banggood.com/custlink/KKDh9267Fz
Minleaf NPS3010W Power Supply https://www.banggood.com/custlink/KKKdtaNN9A
FY6900 Dual Channel 60MHZ Signal Generator https://www.banggood.com/custlink/vGKR9r6RkR
Siglent SDS1104X-E 100Mhz Digital Oscilloscope 4 Channels Standard decoder
Amazon.com: https://amzn.to/36fH1ui
Amazon.ca: https://amzn.to/36fNWUc
(These are affiliate links. I may earn a commission if you shop through the links, it supports the channel and doesn't cost you extra)

Support me on Patreon: https://www.patreon.com/gadgetreboot

Background music from the Youtube music library:
A Rising Wave by Jeremy Blake
Ridge Racer by DivKid

Видео Using Super Glue and Baking Soda to Repair a Plastic Switch Plunger канала Gadget Reboot