Induction heater for removing dents Sheet Metal Repair Tools HotBox WOYO PDR007

Model: WOYO PDR007
Fuse: 10A
Max Voltage: 250 V
Max Power ≈ 800 W
Frequency: 40~45 KHz
Input Voltage:220~240 V
Input Current: 5 A
Output Power: 800 W
Output Voltage: 450 V
Output Current: 2 A
Plug Size: AU
Heater Size(L*W*H):17 x 21.5 x 14.5 cm/6.7" x 8.5" x 5.7"

Features:
1.Simple, easy to use, low cost of learning.
2.Large-screen display, precise control, real-time monitoring.
3.High-precision control, quality assurance, operational safety.
4.Two operating modes to adapt to different needs: ①Time mode ②Power mode.
5.Compared with the traditional way of demolition and repair, speed 6 times faster delivery of owners, improve shop utilization, rapid recovery of investment.

Package Included:
1 x Induction Heater
1 x Power Cable
1 x Quick Connect Head With Cable
3 x Bump Repair Pens
1 x Restoration Head Switch

Warning Before Operation:
1.Do not use this device in patients with pacemakers and various metal prostheses.
2.Before using the equipment, please wear a protective mask, protective gloves and overalls to prevent burns in operation.
3.Do not wear any metal items such as watches, necklaces, keys, belt buckles, coins, zippers, etc..
4.The equipment shall not be used in conductive dust, spray working area, chemical fuel working area, high temperature zone and high humidity area.
5.When the device is powered on, no combustible material can be placed next to it.
6.Before using the equipment, please have a fire extinguisher in case of improper operation.
7.Do not have to install airbags in the vicinity of the use of this tool.
8.If the device is connected to the power supply, it is necessary to guard the equipment. Unplug the AC power outlet when not in use.
9.Equipment storage, the temperature should be maintained at 0~50 ℃, when the mobile device to avoid vibration.

Important Warning In Operation:
1.Repair the head in the repair of damaged body process, repair the head and body temperature will rise rapidly, in the equipment, body, repair head without cooling, please do not touch, so as not to burn.
2. Repair head in the repair process, repair of head and body temperature will rise rapidly, single damaged parts do not for a long time operation (every 1~15 seconds after the operation with a wet towel repeatedly wipe the damaged parts of the cooling), high temperature paint to avoid hurting.
3.Repair process, repair the head and body temperature will rise rapidly, the car experience a moment of weak softening, during the repair of the head do not have to press the action, so as not to soften the moment caused by the increase in depression.

Видео Induction heater for removing dents Sheet Metal Repair Tools HotBox WOYO PDR007 канала Dustin Tian