ESP8266 Internet Clock, Weather Station and Information Display

Another quick project. Quick - because I had almost everything ready. The only thing I had to learn is JSON and HTML parsing from the internet sources.

Features:
- my old ESP-01 module which I finally found good application for (now you can buy better cheap ESPs)
- 6x LEDMatrix module with MAX7219 driver
- supplied directly from USB port thanks to convenient 3.3V voltage regulator with USB plug
- all data are synchronized every 7-8 minutes
- time and date are taken from google.com
- weather informations are grabbed from openweather.org JSON api
- currency rates are grabbed from HTML page
- in the future also other news and infos grabbing can be possible
- no hardware RTC clock is necessary
- no temperature, humidity or pressure sensor

Connections are pretty trivial:
- DataIn to GPIO2
- Load/CS to GPIO1
- Clk to GPIO0
- CH_PD connect to VCC via pullup resistor 10kohm
- 100nF capacitor soldered between VCC and GND
- both resistor and capacitor are soldered directly to ESP8266 module
- 3.3V is taken from voltage regulator module with USB plug, connect it to free VCC/GND pins in last LED Matrix
- soldered extra VCC line between last and first matrix module (to avoid voltage drop)

Source code is available here:
https://drive.google.com/drive/folders/0B_jncvz2HAYCUXhQd1ZreG5vaVk?usp=sharing

NOTE: Recently added support for rotated LED Matrices

Polish version of the display here: https://www.youtube.com/watch?v=Ep6EWlercxY

My other project with ESP8266 and LED Matrix:
https://www.youtube.com/watch?v=gOBVPhPVUdA

MUCH BETTER VERSION OF THIS PROJECT WITH EXTRA FEATURES (10.02.2017):
https://www.youtube.com/watch?v=PUOhUyLCIU8

Видео ESP8266 Internet Clock, Weather Station and Information Display канала cbm80amiga