Jay's Tech Tips #39 - Why is a Catch Can Important for my Build? - Real Street Performance
Catch cans are an often overlooked part during a build but they are necessary for reducing crank case pressure that robs power from your engine. Any pressure under the piston (in the crank case) causes resistance in the rotating assembly's motion. It also leads to leaks and reduced combustion pressure (which is necessary for increased power)
A good catch can should have
Breather Filter - this allows the crank case pressurized air to escape the can.
Inner Baffle - this prevents oil residue from reaching the breather filter
Drain Valve - this allows you to empty the contents of the can without removing the can from the engine bay.
-10 fittings - you don't want to use a hose smaller than -10
*Link to the catch can featured in this Jay's Tech Tip:*
http://realstreetperformance.com/Products/RSP/Real-Street-Performance-10-Catch-Can-Black.html
www.realstreetperformance.com
sales@realstreetperformance.com
Phone: 407-695-7223
Text / Whatsapp: 407-724-2484
120 Maritime Dr
Sanford FL 32771
Видео Jay's Tech Tips #39 - Why is a Catch Can Important for my Build? - Real Street Performance канала REALSTREETPERFTV
A good catch can should have
Breather Filter - this allows the crank case pressurized air to escape the can.
Inner Baffle - this prevents oil residue from reaching the breather filter
Drain Valve - this allows you to empty the contents of the can without removing the can from the engine bay.
-10 fittings - you don't want to use a hose smaller than -10
*Link to the catch can featured in this Jay's Tech Tip:*
http://realstreetperformance.com/Products/RSP/Real-Street-Performance-10-Catch-Can-Black.html
www.realstreetperformance.com
sales@realstreetperformance.com
Phone: 407-695-7223
Text / Whatsapp: 407-724-2484
120 Maritime Dr
Sanford FL 32771
Видео Jay's Tech Tips #39 - Why is a Catch Can Important for my Build? - Real Street Performance канала REALSTREETPERFTV
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Do I need a Harmonic Balancer Crank Damper? - Jay's Tech Tips #31 - Real Street PerformanceMann Provent 200 Crankcase Oil Catch Can in ActionProject Import: Honda B-Series Easy Oil Catch Can/Crank Case Breather complete kitVented VS. Sealed Catch Can Test! Which is best? Watch to find out!Nitrous Systems! Choosing the right parts Jay's Tech Tips # 27Lambda VS AFR - Jay's Tech Tips #35 - Real Street PerformanceIf You Have This Type of Car, You Need This to Prevent Damage to Your Engine - Oil Catch CanJay's Tech Tips #23: Valve SpringsEBAY / AMAZON Oil Catch Can ReviewHow to Properly Setup a Catch Can | Motion 360What is a Surge Tank? How Do I Use One in My Fuel System? - Jay's Tech Tips #36Bottom End Buyers Guide - How to pick the right Pistons Rods Bearings Studs Gaskets Cranks SleevesHow to avoid Common Wiring Mistakes and correctly wire your car electronics - Jay's Tech Tips #30Real Street 2JZ Failure Analysis Tear Down - Dyno Mule V1Do Oil Catch Cans Actually Work?What is an Oil Catch Can and Why Do You Need One?Engine Break-In Jay's Tech Tips 19Does my engine need aftermarket sleeves? Jay's Tech Tips #29 IOil Catch Cans Myth Or Must Have - Ebay Oil Catch Can Review