3D printed worm gears designed in Fusion 360
Worm Gears has few advantages compared to spur gears, but so far, there is no automatic tool in Fusion 360 to add worm drive to our design. For spur gears we can use ADD-IN SCRIPT and those gears can be part of our design with only few clicks. In this video I show step-by-step tutorial how to design a worm gears (worm screw and wheel) in Autodesk Fusion 360. At the end of video, I 3D printed and tested it.
This method is not perfect, probably printed worm screw or wheel cannot be used with standard gears, but if we 3D print both parts, they can work together without problems. I noticed that these 3D printed gears are much noisier compared to spur gears.
Contents:
0:00 - About Worm Gears
4:01 - Design in Fusion 360
12:50 - 3D printing
14:36 - Conclusions
STL and F360 source files can be downloaded from this page:
http://www.mytechfun.com/video/52
Sources used in the video:
https://en.wikipedia.org/wiki/Worm_drive
3D printed top toy (big pitch angle):
https://youtu.be/geReOCHCWkg
Gear diameters image:
https://khkgears.net/new/gear_knowledge/abcs_of_gears-b/basic_gear_terminology_calculation.html
Support my work over PayPal or Patreon:
http://www.mytechfun.com/donation
Видео 3D printed worm gears designed in Fusion 360 канала My Tech Fun
This method is not perfect, probably printed worm screw or wheel cannot be used with standard gears, but if we 3D print both parts, they can work together without problems. I noticed that these 3D printed gears are much noisier compared to spur gears.
Contents:
0:00 - About Worm Gears
4:01 - Design in Fusion 360
12:50 - 3D printing
14:36 - Conclusions
STL and F360 source files can be downloaded from this page:
http://www.mytechfun.com/video/52
Sources used in the video:
https://en.wikipedia.org/wiki/Worm_drive
3D printed top toy (big pitch angle):
https://youtu.be/geReOCHCWkg
Gear diameters image:
https://khkgears.net/new/gear_knowledge/abcs_of_gears-b/basic_gear_terminology_calculation.html
Support my work over PayPal or Patreon:
http://www.mytechfun.com/donation
Видео 3D printed worm gears designed in Fusion 360 канала My Tech Fun
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Creating a Hand Crank Gear Drive for a Wind Turbine?! || Fusion 360SolidWorks: Worm Gear – Assembly – motionHow to Design and 3D print basic spur gears, and how to attach them to shafts (Gears part 1/7)Making a Worm Gear on BoltSolidworks tutorial | sketch Worm gear Animation in SolidworksHexagonal nuts as heat set (thermal) threaded inserts into 3D printingFusion360 TOP 10 Mistakes made by users - Great TIPS3D Printed Stackable PLANETARY GEARBOX - Unlimited Gear RatioCreate Custom 3D Printable Gears in Fusion 360 | Practical Prints #105 Worm Gear Sets [Basics & Types]Surface Modeling with Fusion 3603D Printed WORM GEAR - Can u Really Use Them? (PLA vs PETG vs ABS)How to model Planetary Gears; Requirements, Gear Ratios, Helical/Herringbone (Gears pt 5/7)This 3D Printed GEARBOX is SOO STRONG - Can This REALLY Lift Up More Than 80kg?eSun Standard vs Hard-Tough resin - mechanical tests3D Fräsen mit selbstgebauter CNC Fräse | Fusion 360 Tutorial | 3-D Formen einfach selber FräsenWorm Gears: Explained, Calculated & ModeledCreating a WORKING GEAR JOINT in Autodesk Fusion 360Single Extruder Multicolor in Cura Tutorial // Multipass 3D Printing