Samsung M11 Hang on Logo After Flashing | 100% Working Bootloop Fix Without Box | 2025

Samsung M11 stuck on logo even after flashing successfully? In this video, I’ll show you the **100% working hardware solution** for the Samsung M11 **bootloop issue** — even when flashing is complete and still stuck at the logo.

👉 The real fix in such cases is **CPU reballing**, and I’ll guide you through the steps.

📌 Video Contents:
- Samsung M11 hang on logo after flash
- Flashing complete but phone still not booting
- Common reasons behind this issue
- Full hardware-level repair using CPU reballing
- Tested and working solution in 2025

🛠 Tools Required:
- Hot air rework station
- BGA reballing kit
- Flux, solder paste
- Microscope (optional)
- Proper ESD-safe workstation

⚠️ Important Notes:
✔️ This issue is mostly caused by **bad solder joints under the CPU**
✔️ Flashing won’t fix it if the CPU is not making proper contact
✔️ Only attempt CPU reballing if you have professional tools and experience

📁 Download Links (Firmware/Diagram/Tools): [Go To SamFw For Latest Firmware]

🔧 This video is for professional mobile technicians looking for advanced repair solutions.

#SamsungM11 #BootloopFix #HangOnLogoFix #SamsungM11Reballing #CPUReballing #MobileRepair2025 #HardwareSolution #EMMCIssueFix

📢 Don’t forget to **Subscribe** for more hardware repair tutorials and solutions!

Видео Samsung M11 Hang on Logo After Flashing | 100% Working Bootloop Fix Without Box | 2025 канала GSM Helper