4x4 PTO Driven Timber Trailer BUILD Ep.4 - Chain Housing Finished
Finishing 4x4 PTO driven timber trailer tandem axle chain housing, one side at least. Cutting out the last S355 chain housing parts on the homemade CNC plasma table. Using 6mm S355 steel for all of the housing parts. Sprockets and bearings are off-the-shelf parts I ordered from a farmer store. This 100mm chain tensioner sprocket with the chain tensioner box mount will have a stop inside where the chain tensioner push bolt is tightened against. The hatch lid I cut out is 6mm (1/4") and S355 but I guess it wouldn't hurt to add some reinforcement on the lid and maybe some additional bolts to hold it down more firmly. Excessive force on the lid will only be a problem while reversing the trailer because only then there will be any force applied on the chain tensioner. Next thing in my TO-DO list is the housing for the BMW E39 differential that will be built in between the frame rails. Then the trailer frame itself, propshaft etc. To be continued. Stay tuned!
Trailer specs:
* 28x11-14" tires & 14" rims
* 1450mm/57" wide; length and height - unknown
* tandem axles with homemade chain housings
* BMW E39 530D differential with 2.81 gearing (identical to the UTV diffs)
* hydraulic crane with a boom & grapple for easier log loading & handling
* independent hydraulic power pack
* radio controlled hydraulic winch on the boom
* load capacity - 1-1,5 metric tonne
Stay tuned for the next episode & thanks for watching!
My other videos: https://www.youtube.com/DonnDIY/videos
Support me on: https://www.patreon.com/DonnDIY
Follow me on: https://www.instagram.com/DonnDIY
Homemade 4x4 UTV build: https://youtube.com/playlist?list=PLkmF7FAZBzkUZ3GjEo97GkWajmj9bCxzE
#donndiy #homemade #timbertrailer
Welding equipment borrowed from Spetselektroodi AS, Estonia:
Fronius TransSteel 2700 welder
Optrel Crystal 2.0 Welding Helmet
Hypertherm Powermax 45 XP plasma cutter
Видео 4x4 PTO Driven Timber Trailer BUILD Ep.4 - Chain Housing Finished канала Donn DIY
Trailer specs:
* 28x11-14" tires & 14" rims
* 1450mm/57" wide; length and height - unknown
* tandem axles with homemade chain housings
* BMW E39 530D differential with 2.81 gearing (identical to the UTV diffs)
* hydraulic crane with a boom & grapple for easier log loading & handling
* independent hydraulic power pack
* radio controlled hydraulic winch on the boom
* load capacity - 1-1,5 metric tonne
Stay tuned for the next episode & thanks for watching!
My other videos: https://www.youtube.com/DonnDIY/videos
Support me on: https://www.patreon.com/DonnDIY
Follow me on: https://www.instagram.com/DonnDIY
Homemade 4x4 UTV build: https://youtube.com/playlist?list=PLkmF7FAZBzkUZ3GjEo97GkWajmj9bCxzE
#donndiy #homemade #timbertrailer
Welding equipment borrowed from Spetselektroodi AS, Estonia:
Fronius TransSteel 2700 welder
Optrel Crystal 2.0 Welding Helmet
Hypertherm Powermax 45 XP plasma cutter
Видео 4x4 PTO Driven Timber Trailer BUILD Ep.4 - Chain Housing Finished канала Donn DIY
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Jaw Rock Crusher - BUILD Ep.34x4 PTO Driven Timber Trailer BUILD Ep.1 - IntroductionMore CAT Excavator ProblemsInternational 1000 Sickle Mower Bar Repaired | Engels Coach ShopI've Never seen Smart Workers Like This Work - Amazing Machines & WorkersMaking of futuristic Three-Wheeler Vehicle - I Modified Scooter to the three wheeled vehicleHydraulic Cylinders Are Awesome! But Are These Fixable?Sawmill Build In 20 Minutes Or LessUseful homemade tools | amazingly DIY great tool | Genius idea30 Minutes Of Amazing Machinery & Most Admirable Worker Ever Before #2Jaw Rock Crusher - BUILD Ep.24x4 Off-Road UTV Build - START to FINISHPortable Power Actuated Rim-driven Annular Saw [Restoration]IT'S FINISHED! - Tracked Amphibious Vehicle Build Ep. 25Hitch Crane Build Ep. 4UTV Snow Plow BUILD - Part 2Jaw Crusher In Action - Crushing Concrete, Bricks and RocksRepair DAMAGED Hydraulic Cylinder for CAT 651 Scraper | Part 2Homemade 4x4 super car full version