ENDER3 - Calibrazione del Piatto di Stampa
In questo video vedremo come calibrare il piatto di stampa della ENDER3 ( ma è una procedura che va bene per qualsiasi stampante 3D di tipo prusa/mendel )
E le impostazioni essenziali per Ultimaker Cura, per iniziare a fare le vostre stampe #dazero !
-------------------------------------------------------------------
TEST DI CALIBRAZIONE 100x100mm
CON AUTO POSIZIONAMENTO
-------------------------------------------------------------------
https://www.thingiverse.com/thing:3242512
Qui sotto trovate lo start e end g-code da inserire
in Cura, se ne aveste necessità
-------------------------------------------------------------------
START G-CODE
-------------------------------------------------------------------
; Ender 3 Custom Start G-code
G28 ; Home all axes
G92 E0 ; Reset Extruder
G1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed
G1 X0.1 Y20 Z0.3 F5000.0 ; Move to start position
G1 X0.1 Y200.0 Z0.3 F1500.0 E15 ; Draw the first line
G1 X0.4 Y200.0 Z0.3 F5000.0 ; Move to side a little
G1 X0.4 Y20 Z0.3 F1500.0 E30 ; Draw the second line
G92 E0 ; Reset Extruder
G1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed
; End of custom start GCode
-------------------------------------------------------------------
END G-CODE
-------------------------------------------------------------------
; Ender 3 Custom End G-code
G4 ; Wait
M220 S100 ; Reset Speed factor override percentage to default (100%)
M221 S100 ; Reset Extrude factor override percentage to default (100%)
G91 ; Set coordinates to relative
G1 F1800 E-3 ; Retract filament 3 mm to prevent oozing
G1 F3000 Z20 ; Move Z Axis up 20 mm to allow filament ooze freely
G90 ; Set coordinates to absolute
G1 X0 Y{machine_depth} F1000 ; Move Heat Bed to the front for easy print removal
M84 ; Disable stepper motors
; End of custom end GCode
Видео ENDER3 - Calibrazione del Piatto di Stampa канала Dazero
E le impostazioni essenziali per Ultimaker Cura, per iniziare a fare le vostre stampe #dazero !
-------------------------------------------------------------------
TEST DI CALIBRAZIONE 100x100mm
CON AUTO POSIZIONAMENTO
-------------------------------------------------------------------
https://www.thingiverse.com/thing:3242512
Qui sotto trovate lo start e end g-code da inserire
in Cura, se ne aveste necessità
-------------------------------------------------------------------
START G-CODE
-------------------------------------------------------------------
; Ender 3 Custom Start G-code
G28 ; Home all axes
G92 E0 ; Reset Extruder
G1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed
G1 X0.1 Y20 Z0.3 F5000.0 ; Move to start position
G1 X0.1 Y200.0 Z0.3 F1500.0 E15 ; Draw the first line
G1 X0.4 Y200.0 Z0.3 F5000.0 ; Move to side a little
G1 X0.4 Y20 Z0.3 F1500.0 E30 ; Draw the second line
G92 E0 ; Reset Extruder
G1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed
; End of custom start GCode
-------------------------------------------------------------------
END G-CODE
-------------------------------------------------------------------
; Ender 3 Custom End G-code
G4 ; Wait
M220 S100 ; Reset Speed factor override percentage to default (100%)
M221 S100 ; Reset Extrude factor override percentage to default (100%)
G91 ; Set coordinates to relative
G1 F1800 E-3 ; Retract filament 3 mm to prevent oozing
G1 F3000 Z20 ; Move Z Axis up 20 mm to allow filament ooze freely
G90 ; Set coordinates to absolute
G1 X0 Y{machine_depth} F1000 ; Move Heat Bed to the front for easy print removal
M84 ; Disable stepper motors
; End of custom end GCode
Видео ENDER3 - Calibrazione del Piatto di Stampa канала Dazero
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Creality3D ENDER 3 unboxingBigTreeTech E3 RRF - Installazione e configurazioneStarter Kit per Stampare a RESINA - Anycubic Photon Zero e Wash & CureSidewinder X1 MODDING - #parte 0Come Creare una TABELLA delle TEMPERATURE in MARLINUPS per la STAMPANTE 3D e Mini Modulo UPS BigTreeTechCaricare e Rimuovere il Filamento con il GCODE + SPECIALE 1000 ISCRITTI !Come aggiungere il WIFI alla STAMPANTE 3D con ESP01KYLO REN - Stampato in 3DStampa 3D - Ender 3 - L'estrusore TEMPERATURA e STRINGINGEnder3 + TL SMOOTHER - Cosa sono e a cosa servonoHo realizzato un hotend intercambiabile per la ENDER 3FLSUN Q5 - Unboxing e prime impressioniRecensione ALFAWISE U30 ProInstallazione BLTOUCH v3 e v3.1 su ENDER 3Unboxing e prime impressioni sulla Artillery Sidewinder X1Come Installare MARLIN 1.1.9 sulla ENDER 3Stampa3D - Come Installare Marlin 2 su Qualsiasi Stampante ( o quasi ) - PARTE 2Ender 3 - Come installare un Doppio Estrusore con Hotend 2 in 1Stampa 3D - Ender 3 - Supporti di stampaEnder 3 - Problemi Meccanici e Come Risolverli