Front Axle Restoration/Rebuild (Dana 30)

The rear axle video went really well and I'm happy with how it came out, but my restored and painted Chrysler 8.25 rear axle looked out of place next to the rusty Dana 30 front axle. I decided to try and repeat a similar process by restoring the front end.

Apologies in advance for the ugly welding on the track bar mount. At least it looks better than the one I cut off.

I'm really happy I did it, because I found out that one of the carrier bearing races was split and had destroyed the bearing. Setting up the carrier required a lot more tedious trial and error to set up than setting up the carrier in the Chrysler 8.25 rear axle restoration video. I cut out some of the shim swapping footage to make that part of the video more concise and less boring. I ended up having to buy 2 sets of bearings as well because I needed one modify one set to use as shim spacing setup bearings before pressing the real bearings on. Hopefully that part of the video is not too confusing for people.

I have a few more videos covering parts that connect to the front end of the Jeep that I've finished restoring and recording. You can probably guess what they are if you pay close attention during the end of this restoration video. They will be released as I get done editing them.

instagram.com/restoration.station

Видео Front Axle Restoration/Rebuild (Dana 30) канала Restoration Station