Making my own set of wheels, changing center and offset. It’s not as hard as it looks!
Cutting up two sets of steel wheels to make a set to fit my truck!
I removed the centre from a narrower wheel and welded it into the wider one so that I have the correct bolt pattern and also have a wide wheel. It’s not a difficult job but has to be done correctly fly or you face fire consequences, that’s why I would like to specify that this video is for entertainment purposes only and you should never modify a wheel without proper training.
With that out of the way, I also widen the wheel by cutting it straight down the middle and weld in an 1/8” thick piece of 2” wide flat bar. Then, I ensure that it’s balanced with a tire balancer, and weld it up solid!
After a full summer of driving with these wheels I have no vibrations or issues with leaking through the welds.
Subscribe for lots of other hot rod/ DIY stuff! Thanks for watching
Thanks for checking out the video! If you'd like to help support the channel and see more awesomeness in the future, I'd appreciate you checking out my Patreon!
www.patreon.com/stationroadratrods
I’m open to any sponsorship opportunities, big or small, to help advertise your business and help my channel grow!
I appreciate all the support from viewers and people who’ve helped me along the way!
Please contact barrylambert987@gmail.com
Check out my Facebook group! https://www.facebook.com/groups/837816710112662/?ref=share
Видео Making my own set of wheels, changing center and offset. It’s not as hard as it looks! канала Station road Rat rods
I removed the centre from a narrower wheel and welded it into the wider one so that I have the correct bolt pattern and also have a wide wheel. It’s not a difficult job but has to be done correctly fly or you face fire consequences, that’s why I would like to specify that this video is for entertainment purposes only and you should never modify a wheel without proper training.
With that out of the way, I also widen the wheel by cutting it straight down the middle and weld in an 1/8” thick piece of 2” wide flat bar. Then, I ensure that it’s balanced with a tire balancer, and weld it up solid!
After a full summer of driving with these wheels I have no vibrations or issues with leaking through the welds.
Subscribe for lots of other hot rod/ DIY stuff! Thanks for watching
Thanks for checking out the video! If you'd like to help support the channel and see more awesomeness in the future, I'd appreciate you checking out my Patreon!
www.patreon.com/stationroadratrods
I’m open to any sponsorship opportunities, big or small, to help advertise your business and help my channel grow!
I appreciate all the support from viewers and people who’ve helped me along the way!
Please contact barrylambert987@gmail.com
Check out my Facebook group! https://www.facebook.com/groups/837816710112662/?ref=share
Видео Making my own set of wheels, changing center and offset. It’s not as hard as it looks! канала Station road Rat rods
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
MAD OFFSET - Flipping the center on Steel wheelsBeth Banding some Granada WheelsТюнинг Авто: Делаю Разварки на Жигули Своими Руками Подробный Метод Изготовления РазварокWidening Steel Rims - 4x4 Build Ep.3How to modify steel rimsOld School Tech - How To Reverse Steel WheelsSteel Wheel Centre Alignment - INJURY of What not to doHow to make wide wheels in the Home workshop. Wheel Horse Rear WheelsPeltivanteiden kääntöMAKING CHEAP JDM WHEELS COOL【パーツ#2】 微妙にワイドな加工鉄チン製作/公道不可・イベント用/NA8CロードスターMaking a BBS wheel out of a steelieflipped center steel wheelsWIDENED STEEL WHEELS (NOT BANDED)Wheel Rim Offset ExplainedHow to make your steelies wheel looks awesome #steelies #polish #diamondracingCleaning Nasty Aluminum Wheels with Household Products - WOW !!!!How to Band Steel wheels with ZEWSPEED ZakDemolition derby wheel centerSteel Rim Widening Modification