Denon Receiver HDMI Cable Test - Testing High Speed and older HDMI cables
This video uses the Denon AVR-X4700H receiver to test two High Speed HDMI Cable rated for 4K Video at 30 Hz, 2160p, 48 bit/px color depth and supports bandwidth up to 18Gbps.
The cables tested are:
Certified Monoprice cable
https://smile.amazon.com/gp/product/B01GCGKI3O/
Amazon Basics High Speed Cable.
https://smile.amazon.com/gp/product/B014I8SSD0/
Also tested is an older HDMI cable I had lying around. I have no idea when I got it or what HDMI version it supports. I assume it's at least 1.4.
The procedure should work for any of the 2020 Denon receivers which support HDMI 2.1.
It uses information from this older Denon service manual:
Denon Receiver HDMI cable testing manual
http://www.theaav.com/uploads/2/6/0/1/26016310/denon_hdmi_diagnostics_and_troubleshooting_eng_im_v00.pdf
But for 2020 receivers you need do two things differently:
1) Hook up the HDMI cable between HDMI7 (8k) and the Monitor1 (eARC) HDMI ports on the back of the receiver.
2) Press the
[Back]
and
[Up Cursor]
buttons on the front panel to enter HDMI Diagnostics Mode.
Denon AVR-X4700H 7.1.2 Receiver
https://usa.denon.com/en-us/shop/receivers/avrx4700h
-------------------
Link to my Etsy Store:
https://betacygnidesigns.etsy.com/
-------------------
Music:
"Blippy Trance" Kevin MacLeod (incompetech.com)
Licensed under Creative Commons: By Attribution 4.0 License
http://creativecommons.org/licenses/by/4.0/
-------------------
End Screen Video Acknowledgement:
Cosmic Reef Video produced by NASA and the Space Telescope Science Institute (STScI).
https://hubblesite.org/contents/media/videos/2020/16/1277-Video
Видео Denon Receiver HDMI Cable Test - Testing High Speed and older HDMI cables канала Beta Cygni
The cables tested are:
Certified Monoprice cable
https://smile.amazon.com/gp/product/B01GCGKI3O/
Amazon Basics High Speed Cable.
https://smile.amazon.com/gp/product/B014I8SSD0/
Also tested is an older HDMI cable I had lying around. I have no idea when I got it or what HDMI version it supports. I assume it's at least 1.4.
The procedure should work for any of the 2020 Denon receivers which support HDMI 2.1.
It uses information from this older Denon service manual:
Denon Receiver HDMI cable testing manual
http://www.theaav.com/uploads/2/6/0/1/26016310/denon_hdmi_diagnostics_and_troubleshooting_eng_im_v00.pdf
But for 2020 receivers you need do two things differently:
1) Hook up the HDMI cable between HDMI7 (8k) and the Monitor1 (eARC) HDMI ports on the back of the receiver.
2) Press the
[Back]
and
[Up Cursor]
buttons on the front panel to enter HDMI Diagnostics Mode.
Denon AVR-X4700H 7.1.2 Receiver
https://usa.denon.com/en-us/shop/receivers/avrx4700h
-------------------
Link to my Etsy Store:
https://betacygnidesigns.etsy.com/
-------------------
Music:
"Blippy Trance" Kevin MacLeod (incompetech.com)
Licensed under Creative Commons: By Attribution 4.0 License
http://creativecommons.org/licenses/by/4.0/
-------------------
End Screen Video Acknowledgement:
Cosmic Reef Video produced by NASA and the Space Telescope Science Institute (STScI).
https://hubblesite.org/contents/media/videos/2020/16/1277-Video
Видео Denon Receiver HDMI Cable Test - Testing High Speed and older HDMI cables канала Beta Cygni
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
USS Hornet Restoration of Grumman US2B Tracker #ShortsMika3D Shiny Silk Silver PLA Testing on Flashforge Dreamer NX 3d Printer - Part 2Flashforge Dreamer (NX) - Cold Weather PrintingReplacing a Pull-up Bar on a Play StructureGreen Army Men @ Disney California Adventure #ShortsReplacing a French Drain Sump Pump - Part 23D Printing - How Long Does the Heat Break Tube Last? - Part 2Flashforge Dreamer (NX) - FilaCube Grayish-Brown PLA2 1.75mm Filament Testing - Part 2Building Garden Steps on a 20 Degree Slope - Part 1Marabou Storks, Hippo, and Egyptian Geese #ShortsHun Skal Leve (Hunskaleva) #ShortsWalt Disney World Fruit BatSnow Peak Bipod Stove With MSR WindscreenUpgrading Simplify3D from v4 to v5 - Part 3 - Complex 3D Terrain Model: Jezero Crater on MarsRepairing 30-year old Redwood Deck Cabinet - Part 4Sea Lions at Elkhorn Slough #ShortsDik Dik Eating #ShortsRemixing a Side Filament Loader for the Flashforge Dreamer (NX) - (The Iterative Process) - Part 1Snorkeling on the Kona Coast #ShortsFlashforge Dreamer (NX) - Replacing Printhead & Nozzle plus switching to a Silicone Sock - Part 2Flashforge Dreamer (NX) - Testing HQA PETG Filament - Part 1