I Make a New One! Making new Parts on Lathe & Mill for Restoration Projects (Compilation Part 1)
In this video you can see all the „I make a new one“ moments from 16 restoration videos I made so far on my main channel.
This is just a quick video to get my new second channel started. I'll upload narrated how-to tutorial videos mainly and other stuff here in the future.
I hope you like my work and the video.
Huge thank you to all of my Patreon and PayPal supporters and specially to:
Scott Meola
Afreeflyingsoul
Micky McKay
Adel AlSaffar
Alan Hanson
Alex Roussos
Andreswara Hermawan
Andrew Phillips
Dan Williams
Gregory
Joan Casanovas
John Romero
Jonas Richartz
Jonathan Heckerman
LVE
Paul Ambry
Paul Mampilly
TallBaldandCrafty
Trevor Kam
Vince Valenti
Zachary Grimes
Timestamps:
00:00 Air Die Grinder: making a new air fitting
04:02 Blowtorch: making a new bolt for the head
04:50 Blowtorch: making a new flame tube for the head
06:41 Blowtorch: making a new handle for the pump
08:06 Blowtorch: making a new leather gasket for the pump
09:08 Tire Inflator: making a new bolt for the handle
09:38 Tire Inflator: making a new dial
11:43 Tire Inflatot: making a new distance disc
12:23 Tire Inflator: making 10 tiny bolts
13:02 Gressel Vise: making a new part to hold the spindle
14:20 Screwdriver: making two wooden half shelfs
16:30 Oil Lamp: making a new square shaft for the lock
17:53 Beverly Shear: making a new bolt
19:11 Beverly Shear: making a new special washer
20:12 Rivet Hammer: making a new air fitting
21:56 Micrometer: making a tiny spring
23:06 Micrometer: making two tiny bolts
23:23 Micrometer: making and etching a new name plate
26:29 Coffee Grinder: making four special bolts
27:21 Coffee Grinder: making square nuts and washers
28:04 Coffee Grinder: making a special washer
28:28 Coffee Grinder: making a shaft for the handle
29:13 Coffee Grinder: making a sleeve for the handle
29:52 Coffee Grinder: making a bolt for the handle
30:43 Soldering Iron: making a special ring for the handle
31:47 Soldering Iron: making a new holder for the head
33:28 Soldering Iron: making a new handle
35:01 Wonder Lamp: making two new pins
35:54 Wonder Lamp: making two new eye-bolts
37:21 Wonder Lamp: making two new pins for the handle
38:13 Hand Cranked Grinder: making a sleeve for the handle
39:04 Hand Cranked Grinder: making a cover for the handle
40:11 Hnad Cranked Grinder: making a new shaft for the handle
41:27 Hand Cranked Grinder: making a wooden sleeve for the wheel
42:20 Hand Cranked Grinder: making a sleeve for the sleeve
Link to my main channel:
https://www.youtube.com/channel/UCMrMVIBtqFW6O0-MWq26gqw
Link to the original restoration videos:
Air Die Grinder Restoration
https://www.youtube.com/watch?v=nzVsUntib80&t=2s
Blowtorch Restoration
https://www.youtube.com/watch?v=9oWOu7tTBxo&t=2s
Tire Inflator Restoration
https://www.youtube.com/watch?v=fWikGne44F0&t=1s
Deadlocked Vise Restoration
https://www.youtube.com/watch?v=U2jNeObHnZY&t=1s
Screwdriver Restoration
https://www.youtube.com/watch?v=YNnDGTTcdqw&t=1s
Oil Lamp Restoration
https://www.youtube.com/watch?v=ANsqM0tuXNo
Beverly Shear Restoration
https://www.youtube.com/watch?v=6hVeWufC4E0&t=1s
Rivet Hammer Restoration
https://www.youtube.com/watch?v=ksCQqViwv2s
Micrometer Restoration
https://www.youtube.com/watch?v=nltNxh4PaZY
Coffee Grinder Restoration
https://www.youtube.com/watch?v=zFbHfB2AnVQ&t=2s
Soldering Iron Restoration
https://www.youtube.com/watch?v=FDAWzg0TgVo
Wonder Lamp Restoration
https://www.youtube.com/watch?v=R2M83iah9fo
Hand Cranked Grinder Restoration
https://www.youtube.com/watch?v=PuBywc6Lnk8
My camera:
Panasonic HC-V180
If you have any questions about the process, machines i'm using or other stuff, just ask me in the comments. I read them all and i try to reply as soon as possible.
Sorry for my bad english, it's not my language. I try my best to improve my technical english.
Subscribe for more of my content. I'm uploading videos about mechanical stuff, as new creations and buildings and also restorations.
Thank you for watching :-)
My Patreon Page:
https://www.patreon.com/mymechanics
My PayPal:
my_mechanics@hotmail.com
Follow me on Instagram:
https://www.instagram.com/my_mechanics/
Видео I Make a New One! Making new Parts on Lathe & Mill for Restoration Projects (Compilation Part 1) канала my mechanics insights
This is just a quick video to get my new second channel started. I'll upload narrated how-to tutorial videos mainly and other stuff here in the future.
I hope you like my work and the video.
Huge thank you to all of my Patreon and PayPal supporters and specially to:
Scott Meola
Afreeflyingsoul
Micky McKay
Adel AlSaffar
Alan Hanson
Alex Roussos
Andreswara Hermawan
Andrew Phillips
Dan Williams
Gregory
Joan Casanovas
John Romero
Jonas Richartz
Jonathan Heckerman
LVE
Paul Ambry
Paul Mampilly
TallBaldandCrafty
Trevor Kam
Vince Valenti
Zachary Grimes
Timestamps:
00:00 Air Die Grinder: making a new air fitting
04:02 Blowtorch: making a new bolt for the head
04:50 Blowtorch: making a new flame tube for the head
06:41 Blowtorch: making a new handle for the pump
08:06 Blowtorch: making a new leather gasket for the pump
09:08 Tire Inflator: making a new bolt for the handle
09:38 Tire Inflator: making a new dial
11:43 Tire Inflatot: making a new distance disc
12:23 Tire Inflator: making 10 tiny bolts
13:02 Gressel Vise: making a new part to hold the spindle
14:20 Screwdriver: making two wooden half shelfs
16:30 Oil Lamp: making a new square shaft for the lock
17:53 Beverly Shear: making a new bolt
19:11 Beverly Shear: making a new special washer
20:12 Rivet Hammer: making a new air fitting
21:56 Micrometer: making a tiny spring
23:06 Micrometer: making two tiny bolts
23:23 Micrometer: making and etching a new name plate
26:29 Coffee Grinder: making four special bolts
27:21 Coffee Grinder: making square nuts and washers
28:04 Coffee Grinder: making a special washer
28:28 Coffee Grinder: making a shaft for the handle
29:13 Coffee Grinder: making a sleeve for the handle
29:52 Coffee Grinder: making a bolt for the handle
30:43 Soldering Iron: making a special ring for the handle
31:47 Soldering Iron: making a new holder for the head
33:28 Soldering Iron: making a new handle
35:01 Wonder Lamp: making two new pins
35:54 Wonder Lamp: making two new eye-bolts
37:21 Wonder Lamp: making two new pins for the handle
38:13 Hand Cranked Grinder: making a sleeve for the handle
39:04 Hand Cranked Grinder: making a cover for the handle
40:11 Hnad Cranked Grinder: making a new shaft for the handle
41:27 Hand Cranked Grinder: making a wooden sleeve for the wheel
42:20 Hand Cranked Grinder: making a sleeve for the sleeve
Link to my main channel:
https://www.youtube.com/channel/UCMrMVIBtqFW6O0-MWq26gqw
Link to the original restoration videos:
Air Die Grinder Restoration
https://www.youtube.com/watch?v=nzVsUntib80&t=2s
Blowtorch Restoration
https://www.youtube.com/watch?v=9oWOu7tTBxo&t=2s
Tire Inflator Restoration
https://www.youtube.com/watch?v=fWikGne44F0&t=1s
Deadlocked Vise Restoration
https://www.youtube.com/watch?v=U2jNeObHnZY&t=1s
Screwdriver Restoration
https://www.youtube.com/watch?v=YNnDGTTcdqw&t=1s
Oil Lamp Restoration
https://www.youtube.com/watch?v=ANsqM0tuXNo
Beverly Shear Restoration
https://www.youtube.com/watch?v=6hVeWufC4E0&t=1s
Rivet Hammer Restoration
https://www.youtube.com/watch?v=ksCQqViwv2s
Micrometer Restoration
https://www.youtube.com/watch?v=nltNxh4PaZY
Coffee Grinder Restoration
https://www.youtube.com/watch?v=zFbHfB2AnVQ&t=2s
Soldering Iron Restoration
https://www.youtube.com/watch?v=FDAWzg0TgVo
Wonder Lamp Restoration
https://www.youtube.com/watch?v=R2M83iah9fo
Hand Cranked Grinder Restoration
https://www.youtube.com/watch?v=PuBywc6Lnk8
My camera:
Panasonic HC-V180
If you have any questions about the process, machines i'm using or other stuff, just ask me in the comments. I read them all and i try to reply as soon as possible.
Sorry for my bad english, it's not my language. I try my best to improve my technical english.
Subscribe for more of my content. I'm uploading videos about mechanical stuff, as new creations and buildings and also restorations.
Thank you for watching :-)
My Patreon Page:
https://www.patreon.com/mymechanics
My PayPal:
my_mechanics@hotmail.com
Follow me on Instagram:
https://www.instagram.com/my_mechanics/
Видео I Make a New One! Making new Parts on Lathe & Mill for Restoration Projects (Compilation Part 1) канала my mechanics insights
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Homemade Lathe Machine500 Horas tardé en fabricar este motor de 7 CilindrosMaking Motorized Rotary TableОт постройки Турбо Реактивного двигателя до полета - всего один шагBroken Deadlocked Vise - Perfect Restoration (I did it again)Antique Rusty Micrometer - Precise Restoration12 VERY USEFUL HOME-MADE PROJECTS16 AMAZING HOME MADE INVENTIONS FROM ANGLE GRINDER / YOU NEED TO SEE 2020DC Motor Armature Rewinding, 5.5-kw from Majeda Electric & Workshop.Видеоурок-75. Сборка и футеровка скальных сверхусиленных ковшей/Video tutorial-75. Assembly and liniRear Axle Restoration and Rebuild (Chrysler 8.25)I Make a New One! Making new Parts on Lathe & Mill for Restoration Projects (Compilation Part 2)Making The Hydraulic Press - DIY 20 Ton Hydraulic Shop Press from scrap metalRusty Arbor Press - RestorationI turn a Stainless Bolt into a Combination Lock1891 German ''Weltrekord'' Ratchet Screwdriver - RestorationAntique Rusty Hacksaw with Broken Blade - RestorationI turn a Railroad Track into an Anvil! Simple & Easy DIY - Homemade AnvilI make an ''8 Ball'' out of solid Stainless Steel and BrassRusty Jammed Rebar Cutter - Restoration