DIY Tire Bead Breaker - 4x4 Build Ep.4
Latest video: https://youtu.be/A7XDC5o_SWU
Taking apart the old struts with spring compressors to see how many of them are still usable and start hacking and modifying them for bigger ATV tires, custom rims and Volkswagen Golf 1 rear axle springs. The rims I'm using are original Peugeot Partner 14" steelies that I modified quite a bit to make them work with the Kenda Executioner 28" ATV tires on original Peugeot struts. I'm also fabricating a functional tire bead breaker out of scrap metal which I attached to the workshop ceiling support post so I don't have to drill into the floor to anchor it. Now I can break tire beads on various wheels.
This is part of a series of a four wheel drive utility vehicle build to lessen the work load on my trusty 2002 Honda Foreman Rubicon TRX500FA. This partially answers the question "Why?" but for those who want to ask "why don't you just buy a side-by-side instead of building one?" I just want to say - I'm not made of money. Side-by-sides are ridiculously expensive, even the car I drive around daily is worth less (not worthless though!), hell, it is even worth less than my 2002 Honda ATV.
"How much HP will it have?" - the 1.4 litre FWD petrol engine I'm planning on using has 55 kw and this will not change, but the torque will be tripled via the BMW differentials I'm using to transfer power to front and rear axles.
"It will be too heavy!" - this project just like the firewood processor project does not have to float. And a heavier vehicle will handle better anyway when hauling heavy loads.
Stay tuned for future episodes! Thanks for watching!
My other videos: www.youtube.com/DonnDIY
#donndiy #homemade #4x4
Soundtrack:
Pomade - Silent Partner (YouTube Audio Library)
Welding equipment borrowed from Spetselektroodi AS, Estonia:
Fronius TransSteel 2700 welder
Optrel Crystal 2.0 Welding Helmet
Hypertherm Powermax 45 XP plasma cutter
Видео DIY Tire Bead Breaker - 4x4 Build Ep.4 канала Donn DIY
Taking apart the old struts with spring compressors to see how many of them are still usable and start hacking and modifying them for bigger ATV tires, custom rims and Volkswagen Golf 1 rear axle springs. The rims I'm using are original Peugeot Partner 14" steelies that I modified quite a bit to make them work with the Kenda Executioner 28" ATV tires on original Peugeot struts. I'm also fabricating a functional tire bead breaker out of scrap metal which I attached to the workshop ceiling support post so I don't have to drill into the floor to anchor it. Now I can break tire beads on various wheels.
This is part of a series of a four wheel drive utility vehicle build to lessen the work load on my trusty 2002 Honda Foreman Rubicon TRX500FA. This partially answers the question "Why?" but for those who want to ask "why don't you just buy a side-by-side instead of building one?" I just want to say - I'm not made of money. Side-by-sides are ridiculously expensive, even the car I drive around daily is worth less (not worthless though!), hell, it is even worth less than my 2002 Honda ATV.
"How much HP will it have?" - the 1.4 litre FWD petrol engine I'm planning on using has 55 kw and this will not change, but the torque will be tripled via the BMW differentials I'm using to transfer power to front and rear axles.
"It will be too heavy!" - this project just like the firewood processor project does not have to float. And a heavier vehicle will handle better anyway when hauling heavy loads.
Stay tuned for future episodes! Thanks for watching!
My other videos: www.youtube.com/DonnDIY
#donndiy #homemade #4x4
Soundtrack:
Pomade - Silent Partner (YouTube Audio Library)
Welding equipment borrowed from Spetselektroodi AS, Estonia:
Fronius TransSteel 2700 welder
Optrel Crystal 2.0 Welding Helmet
Hypertherm Powermax 45 XP plasma cutter
Видео DIY Tire Bead Breaker - 4x4 Build Ep.4 канала Donn DIY
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Widening Steel Rims - 4x4 Build Ep.34x4 Build Ep.5 - Vehicle Mock-UpШиномонтаж для гаража своими руками на подшипниках. Процесс сборки разборки колеса#makna caseira feita com sucata, ( makna de desmontar #pneus de moto)Ken tool 35998 bead breakerHydraulic CAR JACK modification#1 домашний шиномонтаж своими руками / tire home with their own handsHow to make a 3 wheel electric Bicycle at homeHomemade A Small Mobile Crane For WorkshopAxle Dampers - Tracked Amphibious Vehicle Build Ep. 9Dump trailer BUILDHow to make steel matchstick gun4x4 Build Ep.6 - Tube Frame FabricationChainsaw Bar Mount - Log Splitter To Firewood Processor Ep. 4Homemade Roller Bender - Make A Metal BenderPowertrain From Tractor PTO Parts - Tracked Amphibious Vehicle Build Ep. 5Belt Conveyor Build - Part 1Ремонт бокового повреждения легкового колеса.Final Assembly - Tracked Amphibious Vehicle Build Ep. 24My DIY Rocket Stove Gas Cylinder Build