Starting Out in CNC P2 (reprise) [video 386]

So almost a year ago I started a series about building an #Ooznest #Workbee #CNC that ran for 3 episodes, then stalled due to lack of time & space - both things to bear in mind if you’re thinking about building a CNC, btw… I recently completed my CNC build, and the video series, but I thought it made sense to post an ‘edited with up-to-date-information’ video of those first three episodes, before starting in on the all-new series, which will come along the usual schedule next week.

So this is Part 2, of a multi-part series; Part 3 will be out tomorrow, and Part 4 next week. It’s been a long time coming - enjoy!

Part 1 is here - https://youtu.be/4ua_WVqXFjI

++++++++

Special thanks to the guys at Ooznest for their patience and understanding during the production of this series. Check out their amazing CNC and 3D printer products and consumables here - http://bit.ly/Ooznest

++++++++

Don’t forget, if you’re looking for a few gift ideas and want to support the channel then take a look at my Etsy store, my Amazon Affiliate store, or any of the links below.

My Etsy - http://bit.ly/10minuteShop

See the channel blog for more direct links - http://bit.ly/10minuteBlog

Amazon store - http://bit.ly/10minuteworkshop

My ‘social’ links in one place - https://www.10minuteworkshop.com/links

Check out what’s available for download here:- http://bit.ly/10minutevod

Support the channel directly - http://bit.ly/donate_to_10minuteworkshop

Support the channel on Patreon - http://www.patreon.com/10minuteworkshop

Shop for merch - teespring.com/stores/10-minute-workshop or https://bit.ly/10minutemerch

Full list of ‘Stuff I use’ at Full list of ‘Stuff I use’ at https://www.10minuteworkshop.com

Connect with me on twitter @10minuteshop

Connect with me on Instagram - @10minuteworkshop

Listen to my podcast - http://www.measuringuppodcast.com

+++++++

As an Amazon Associate, I earn from qualifying purchases made through these links.

Wherever possible links are to actual products used, but this is not always possible e.g. some products are not available in the US, so something similar has been linked to instead.

Amazon UK - https://www.amazon.co.uk/shop/petermillard1

++++++++

Used/featured in this video:-

Ooznest Workbee CNC complete kit, global shipping - http://bit.ly/Ooznest

Wera tool-check plus - https://amzn.to/2znpyik (US: https://amzn.to/2FC9nE3)

Bessey Duoklamp - https://amzn.to/2F0RfUb (US: https://amzn.to/2zeIpN5)

Katsu trim router - https://amzn.to/2RxF6r4 (non-US, sorry)

Hot glue gun - https://amzn.to/2vewDUs(US: http://amzn.to/2u2cgYc)

Glue sticks - http://amzn.to/2sXpCAf (US: http://amzn.to/2sQGsp2)

Bessey Duo Klamp - http://amzn.to/2tsSWQs (US:http://amzn.to/2sVaRBH)

Hultafors Talmeter tape measure - http://amzn.to/2pHwnbH (US: http://amzn.to/2oqLQc9)

Moldex 6810 in-ear defenders - https://amzn.to/2P2c5nP (US:https://amzn.to/2LgIsye)

Mirok square, global shipping - https://etsy.me/2yW0ChK

Other useful gear…

Festool Midi extractor - http://amzn.to/2tCIN3Q (US: http://amzn.to/2rKNIOx)

Festool lever clamp - http://amzn.to/2pOohLD (US: http://amzn.to/2pnFZIM)

Festool screw clamp N.B. cheaper elsewhere - https://amzn.to/3ae6S5M (US: https://amzn.to/39jgRWj)

Festool MFT - https://amzn.to/2x49HHE (US: https://amzn.to/2J25aKy)

Bosch/Mafell skinny quick clamp - https://amzn.to/2UguQYr (US: https://amzn.to/2QKMFwO)

Festool PDC 18/4 - http://amzn.to/2s3J0eq (US: http://amzn.to/2tWUHEL)

Festool CXS - http://amzn.to/2syMO8Z (US: http://amzn.to/2r0TZ7U)

Festool TS55 Tracksaw - http://amzn.to/2pGvzDS (US: http://amzn.to/2oOgGhw)

Festool ETS 150/5 - http://amzn.to/2sapsq9 (US: http://amzn.to/2ssbZgq)

Festool Kapex 120 - http://amzn.to/2oYOXeq (US: http://amzn.to/2o7D3zL)

Festool Granat abrasive - http://amzn.to/2A3c1vW (US: http://amzn.to/2gPAAUz)

Festool RTS 400 - http://amzn.to/2x6zGZW (US: http://amzn.to/2i84yXn)

Festool ETS 150/5 - http://amzn.to/2sapsq9 (US: http://amzn.to/2ssbZgq)

Festool CTL Sys - http://amzn.to/2sKa2t3 (US: http://amzn.to/2tCvVdZ)

Festool CTL SYS Bags - https://amzn.to/2G9eFVd (US: https://amzn.to/2GduBpo)

Trend Air Stealth Facemask - https://amzn.to/2zah0P6 (US: https://amzn.to/2T5ww6X)

Spax screws - http://amzn.to/2oYWydc (US: http://amzn.to/2oOjkDT)

Bahco 6” combi square - http://amzn.to/2oumhX4 (US: http://amzn.to/2ouSg9k)

+++++++++

Видео Starting Out in CNC P2 (reprise) [video 386] канала Peter Millard