DIY PVC Awning

See Awning setup for Jeep camping:
➡️ https://youtu.be/kz0aMSVU5UQ ⬅️

Message me to send you full write-up.
Supply List:

• Heavy Duty Brown 8x10 ft tarp
(**I suggest buying an 8x6 ft or if an 8x8ft exists. I ended up cutting the tarp to 8x8, sewed it, and put in new grommets. If you don’t alter it like me, ignore the grommet kit on this supply list).
• 4inch PVC Pipe
(Comes as a 10 foot pipe that you must cut)
• Black spray paint (I bought two cans)
(For PCV, hose clamps, caps etc.)
• 4 inch Fip Adaptor
• 4 inch plug
• 4 inch PVC cap
• ¾ inch EMT conduit pole
• ½ inch EMY conduit pole X 2
• Telescopic pole ( adjsutable 4 ft to 7 ft)X 2
(I just used telescopic poles meant for paining since I couldn’t find proper tent poles. Cabelas has telescopic tent poles for about $10, do this instead of what I did haha)
• 5/16 inch X 4 inch eye bolt X 2
• 5/16 inch X 2 inch carriage bolt x6
• Washers x4
• 5/16 wing nuts X 6
• 5 inch hose clamps X 3
• 5/16 inch nuts x 6
• 5/16 inch hanger bolts X 2
• 5/16 inch 1.5 inch carriage bolts X 2
• Velcro Straps
• Grommet Kit

Видео DIY PVC Awning канала Mud Footprints