How to Replace Front Lower Control Arms with Ball Joint 2014-2020 Acura MDX

Shop TRQ on 1AAuto.com
Control Arm with Ball Joint Set https://trq.video/ia-1ASFK08818
Control Arm with Ball Joint https://trq.video/ia-1ASLF01053
Control Arm with Ball Joint https://trq.video/ia-1ASLF01054
Shop TRQ on eBay
Control Arm with Ball Joint Set https://www.ebay.com/itm/314108491091?mkcid=1&mkrid=711-53200-19255-0&siteid=0&campid=5339145770&customid=ebayyoutube&toolid=10001&mkevt=1
Control Arm with Ball Joint https://www.ebay.com/itm/314001785988?mkcid=1&mkrid=711-53200-19255-0&siteid=0&campid=5339145770&customid=ebayyoutube&toolid=10001&mkevt=1
Control Arm with Ball Joint https://www.ebay.com/itm/314106620495?mkcid=1&mkrid=711-53200-19255-0&siteid=0&campid=5339145770&customid=ebayyoutube&toolid=10001&mkevt=1
Shop TRQ on Amazon
Control Arm with Ball Joint Set https://www.amazon.com/dp/B09RX63ZMQ/ref=nosim?tag=trq_youtube-20
Control Arm with Ball Joint https://www.amazon.com/dp/B09J8Y3ZBD/ref=nosim?tag=trq_youtube-20
Control Arm with Ball Joint https://www.amazon.com/dp/B09J8WSX52/ref=nosim?tag=trq_youtube-20
Shop TRQ on Walmart
Control Arm with Ball Joint Set https://www.walmart.com/ip/TRQYouTube/1700936656
Control Arm with Ball Joint https://www.walmart.com/ip/TRQYouTube/1643224408
Control Arm with Ball Joint https://www.walmart.com/ip/TRQYouTube/1610912678
This video shows you how to install new front lower control arms with ball joint from TRQ on your 2014-2020 Acura MDX. Control arms are a crucial part of the suspension system of your vehicle. They not only carry the load of the vehicle to the wheel, but they typically also maintain its alignment. Control arms are typically large and strong, so you may be surprised it needs replacing. They contain rubber bushings for smoother rides at the cost of eventual wear, or integrated ball joints that require replacing the entire arm when they wear.

Estimated installation time for a professional technician is approximately: 54 minutes

This repair was done on a 2016 Acura MDX SH-AWD 3.5L Sport Utility 4-Door AWD Automatic and the process should be similar on the following vehicles:
2014 Acura MDX
2015 Acura MDX
2016 Acura MDX
2017 Acura MDX
2018 Acura MDX
2019 Acura MDX
2020 Acura MDX

Tools you will need:
• Pry Bar https://trq.video/oaRb-1AXAA00020
• 19mm Wrench
• 19mm Socket
• 22mm Socket
• Needle nose pliers
• Needle nose pliers
• Ratchet
• Socket Extensions
• Torque Wrench https://trq.video/ocEe-1AXAA00044
• Floor Jack
• Hammer
• Jack Stands
• Wheel Chocks
• Gloves https://trq.video/odST-1AXSS00048
• Safety Glasses

Subscribe: https://www.youtube.com/channel/UCWCdsftsTqYMO7cA_5Sc-yA?sub_confirmation=1

📱 Download the TRQ Auto Repair App for more videos, torque specifications, and car repair information: https://trq.video/appdownloadyt

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Note: As an Amazon Associate we earn from qualifying purchases.

Видео How to Replace Front Lower Control Arms with Ball Joint 2014-2020 Acura MDX канала TRQ