How to Connect the Beagle Camera V1&V2 to the Klipper Printer?

How to Connect the Beagle Camera(V1&V2) to Klipper Printer?
https://www.mintion.net/blogs/3d-printer-camera-guidelines/how-to-connect-the-beagle-camerav1-amp-v2-to-klipper-printer

Please check the camera's compatibility list:
https://www.mintion.net/pages/3d-printer-camera-compatibility
About Url:

For Fluidd:
Camera Url Stream: http://{Camera IP address}/ipcam/mjpeg.cgi
For example: http://192.168.0.58/ipcam/mjpeg.cgi
For Mainsail:
Camera Url Stream: http://{Camera IP address}/ipcam/mjpeg.cgi
For example: http://192.168.0.88/ipcam/mjpeg.cgi

Camera Url Snapshot: http://{Camera IP address}/images/snapshot0.jpg
For example: http://192.168.0.88/images/snapshot0.jpg
Buy Mintion | Beagle V2 Camera | 3D Printer Camera
👉 https://www.mintion.net/products/mintion-beagle-v2-3d-printer-camera

#3dprintercamera #3dprint #3dprinting #3dprintedart #3dprinter #timelapse #BeagleCamera

Видео How to Connect the Beagle Camera V1&V2 to the Klipper Printer? канала Mintion Official