Auto Reclosing in Power Network | Auto Recloser Whys ? | Auto Recloser Types | ANSI Device Number 79
It is always desirable that the continuation of power flow through the lines should not be interrupted for a long time. The faults on overhead lines can be transient or permanent. Since some transient faults get cleared automatically and do not require any attempt for fault rectification. Hence the relay auto-recloser, upon clearance its fault, closes the breaker after it has been opened due to the fault.
Fault Types:
The type of faults occurs in the network are;
Transient faults
Semi Transient Faults
Permanent Faults.
Join this channel to get access to perks:
https://www.youtube.com/channel/UCqTISD-Pt3f7h_SLua4sWUw/join
#PowerSystemOperationSlides
#AutoReclosingPowerNetwork
#ANSI79
@PowerSystemOperationSlides
Видео Auto Reclosing in Power Network | Auto Recloser Whys ? | Auto Recloser Types | ANSI Device Number 79 канала Power System Operation Slides
Fault Types:
The type of faults occurs in the network are;
Transient faults
Semi Transient Faults
Permanent Faults.
Join this channel to get access to perks:
https://www.youtube.com/channel/UCqTISD-Pt3f7h_SLua4sWUw/join
#PowerSystemOperationSlides
#AutoReclosingPowerNetwork
#ANSI79
@PowerSystemOperationSlides
Видео Auto Reclosing in Power Network | Auto Recloser Whys ? | Auto Recloser Types | ANSI Device Number 79 канала Power System Operation Slides
Auto Reclosing in Power Network Auto Recloser Whys Auto Recloser Types ANSI Device Number 79 Auto Reclosing Operating Principle of an Auto Recloser Types Of Auto Recloser High Speed Single Pole Reclosing High Speed Three Poles Reclosing Delayed Three Pphase Reclosing DAR With Deadline & Synchronism Check HTAR with DL and SC HTAR with Parallel Line Check HTAR DAR Autoreclosing Selection System Stability and Synchronism High Speed Auto Reclosing Autorecloser Relay
Комментарии отсутствуют
Информация о видео
26 августа 2024 г. 20:57:41
00:14:41
Другие видео канала