Powertrain From Tractor PTO Parts - Tracked Amphibious Vehicle Build Ep. 5
Latest video: https://youtu.be/eKxiGML_8r4
Fabricating tracked amphibious vehicle powertrain from tractor PTO parts to transmit the power to the axles which will drive the tracks. The whole day Monday and half of Tuesday this week I was trying to get the plasma cutter to work but the compressed air system still needs extra filters and water collectors and also a completely new line installed in the workshop that will supply the plasma cutter with compressed air since I moved the big air compressor further away from the shop. I didn't get the plasma cutter to work at the moment and had to stick to the angle grinder when cutting out the flanges for the drive shafts or cutting material for the bearing housings. MIG welding the flanges to the PTO forks was a bit tricky - it spit spatter at the beginning and I suspected the material of the PTO forks being high(er) carbon content. But in the end - it was like butter welding it. I also got a start on the bearing housings - the part still cools in the chuck of the lathe as we speak. At first I wanted to make'em out of a simple pipe but it turned out to be a failure since the wall thickness wasn't enough and I didn't want to weld more metal in the pipe to create a lip where the bearing will be pressed against since it was covered with zinc. And welding zinc covered steel is more poisonous than welding raw steel. The progress is slow but inevitable (imagine this sentence with agent Smith's voice from Matrix). I hope you like this all terrain tracked amphibious vehicle build episode. Share, comment, like, subscribe! Cheers!
#donndiy #atv #trackedamphibiousvehicle
This video is part of a series of videos, check out the series here: https://www.youtube.com/playlist?list=PLkmF7FAZBzkWdzAxcrnz-WJbzSRyqrSBt
Check out other videos on my channel page: https://www.youtube.com/c/DonnDIY
Soundtrack:
Pomade - Silent Partner (YouTube Audio Library)
Welding equipment:
Fronius TransSteel 2700
Optrel Crystal 2.0 Welding Helmet
Видео Powertrain From Tractor PTO Parts - Tracked Amphibious Vehicle Build Ep. 5 канала Donn DIY
Fabricating tracked amphibious vehicle powertrain from tractor PTO parts to transmit the power to the axles which will drive the tracks. The whole day Monday and half of Tuesday this week I was trying to get the plasma cutter to work but the compressed air system still needs extra filters and water collectors and also a completely new line installed in the workshop that will supply the plasma cutter with compressed air since I moved the big air compressor further away from the shop. I didn't get the plasma cutter to work at the moment and had to stick to the angle grinder when cutting out the flanges for the drive shafts or cutting material for the bearing housings. MIG welding the flanges to the PTO forks was a bit tricky - it spit spatter at the beginning and I suspected the material of the PTO forks being high(er) carbon content. But in the end - it was like butter welding it. I also got a start on the bearing housings - the part still cools in the chuck of the lathe as we speak. At first I wanted to make'em out of a simple pipe but it turned out to be a failure since the wall thickness wasn't enough and I didn't want to weld more metal in the pipe to create a lip where the bearing will be pressed against since it was covered with zinc. And welding zinc covered steel is more poisonous than welding raw steel. The progress is slow but inevitable (imagine this sentence with agent Smith's voice from Matrix). I hope you like this all terrain tracked amphibious vehicle build episode. Share, comment, like, subscribe! Cheers!
#donndiy #atv #trackedamphibiousvehicle
This video is part of a series of videos, check out the series here: https://www.youtube.com/playlist?list=PLkmF7FAZBzkWdzAxcrnz-WJbzSRyqrSBt
Check out other videos on my channel page: https://www.youtube.com/c/DonnDIY
Soundtrack:
Pomade - Silent Partner (YouTube Audio Library)
Welding equipment:
Fronius TransSteel 2700
Optrel Crystal 2.0 Welding Helmet
Видео Powertrain From Tractor PTO Parts - Tracked Amphibious Vehicle Build Ep. 5 канала Donn DIY
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Machining Axles - Tracked Amphibious Vehicle Build Ep. 6Hydraulic CAR JACK modificationWelding Workers Who Are Professional and Experts Of High Level ▶3Fabricating & Welding Steel Frame - Tracked Amphibious Vehicle Build Ep. 7Making a differential braking tank transmissionTube Frame Fabrication - 4x4 Off-Road UTV Project Ep.6Powerful idea from Blender Motor and Broken Angle Grinder? - Brilliant Invention !!!Dump trailer BUILDRestoration of old samdi D24 diesel engine | Restore and reuse the old rusty rice mill engineAxle Dampers - Tracked Amphibious Vehicle Build Ep. 9Hydraulic Car Jack + Bearing Puller = Homemade Hydraulic Puller (The best DIY Creative Smart Idea)Chainsaw Bar Mount - Log Splitter To Firewood Processor Ep. 4Мало кто знает об этой функции ТОРМОЗНОГО ДИСКА !!!0040-31 D, KL-0174..Series, KL-0042-91 K Wheel Bearing replacementDIY Vacuum Pump And ChamberFinal Assembly - Tracked Amphibious Vehicle Build Ep. 24Top 10 Genius ideas! You May Need ThisOld GearBox Reducer for Cordless Drill ??? Building a simple Lathe for WoodworkingIT'S FINISHED! - Tracked Amphibious Vehicle Build Ep. 25