Ah, Tremendous - Dual: OR

We pick up right where we left off, with Dual AND engaged… but to change to OR, we’ll need to enter Deep Settings. We do this by double flipping the Rate-Ramping-Toggle quickly (the On/Off LED 🟠 flickers to signal the change). Now we flip the Depth-Ramping-Toggle upward to change from AND(&&) to OR(||).

To say it a little more precisely than the video - AND combines the two LFO’s by comparing them and taking whichever value is lower, hence cutting signal is more prevalent. OR does the opposite - compares the LFO’s and takes whichever value is higher. This is why when the Square Wave on Under 🔵 is high, we loose the Over 🟢 tremolo undulating beneath it. This is because the OR function only takes the higher value which is maxed out by the square waveform.

This also checked a box for me in wanting to have internal routing of an LFO to the Depth parameter. This could be done externally by running one of the CV Outputs to the EXP Input with a TRS cable, and turning on just the Depth to be controlled, the same way you would with an Expression Pedal. (More on CV feedback to come!)

#guitarpedals #electricguitar #stompbox #modularsynth

Видео Ah, Tremendous - Dual: OR канала Over Under Pedals