UJK Technology Hinge Jig With Clamp Plate
This is a single aperture hinge jig suitable for all doors.
It is a lightweight jig, easy to use with minimal set up time. Once set for the size of hinge, cutting the recess on the door frame requires no further adjustment.
This jig gives quick and accurate results. It is suitable for hinges from 50mm(2") to 127mm(5") long and with leaf widths between 6.5mm(1/4") and 35mm(1.3/8").
The body has engraved markings for easy measurement and setting.
The hinge jig is made of 12mm thick High Pressure Laminate, dimensionally stable and with a lifetime guarantee never to warp; additional parts are aluminium.
The end datum stop controls the 3mm gap between the top of the door and frame.
The jig comes with the clamping plate accessory and easy-to-follow, step-by-step instructions. Additional equipment required: 1/2" router, 12mm straight cutter, 16mm guide bush, screwdriver, two bradawls or two clamps.
To purchase: http://www.axminster.co.uk/ujk-technology-hinge-jig-with-clamp-plate-101504
Видео UJK Technology Hinge Jig With Clamp Plate канала Axminster Tools
It is a lightweight jig, easy to use with minimal set up time. Once set for the size of hinge, cutting the recess on the door frame requires no further adjustment.
This jig gives quick and accurate results. It is suitable for hinges from 50mm(2") to 127mm(5") long and with leaf widths between 6.5mm(1/4") and 35mm(1.3/8").
The body has engraved markings for easy measurement and setting.
The hinge jig is made of 12mm thick High Pressure Laminate, dimensionally stable and with a lifetime guarantee never to warp; additional parts are aluminium.
The end datum stop controls the 3mm gap between the top of the door and frame.
The jig comes with the clamping plate accessory and easy-to-follow, step-by-step instructions. Additional equipment required: 1/2" router, 12mm straight cutter, 16mm guide bush, screwdriver, two bradawls or two clamps.
To purchase: http://www.axminster.co.uk/ujk-technology-hinge-jig-with-clamp-plate-101504
Видео UJK Technology Hinge Jig With Clamp Plate канала Axminster Tools
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Introduction to Steam Bending Pt 2 - Woodworking WisdomHow to Make a Robot Incense Burner - Woodworking WisdomHow to rout box joints with the Leigh RTJ400 Router Table Dovetail Jig.Workshop Q&A with Colwin and Ben - Woodworking WisdomHow to Make a Wooden Boot Rack - Woodworking WisdomAxcaliber Ripper Bandsaw Blade - Product OverviewDeWALT FLEXVOLT BatteryAxminster Woodturning Gripper Jaws Type HHow to rout half pitch through dovetails with the Leigh RTJ400 Router Table Dovetail Jig.Scroll Saw Lizard Mosaic - Woodworking WisdomCelebrating 50 Years | Made in Axminster TrailerAxminster Trade AT152OVS Bobbin Sander - Product OverviewMakita DLX2002M Brushless Combi & Impact Kit 18V 4.0AhCelebrating 50 Years | The Tools You NeedSet up Guide for Axminster Professional Ultimate Edge Variable Speed Sharpening SystemEgg Cup & Holder Part 1 - Woodworking WisdomHow to Make a Bar Table Part 1 - Woodworking WisdomTurn a Winged Bowl - Woodworking WisdomWoodworking Wisdom - Drill Bits For Woodworking with CraigOut of the Woodwork Podcast | Alan and Ian StylesAxminster Workshop Paste Wood Wax - Product Overview