Indirect Temperature Control of Dryers
PRINCIPLES OF OPERATION:
A dryer is used for the evaporation of liquids from solids. Most types of dryers are indirectly heated with either an internal exchanger coil or an external heat transfer jacket. This allows the use of remote heating and cooling utilities such as water or oil to precisely control temperatures inside the dryer. A moisture-laden product is introduced into the drying chamber and is heated to a temperature required to drive off liquid from the product. Many dryers operate under a vacuum to facilitate this evaporation. There are a wide range of indirectly heated process dryers available. Shown above is a Shelf Dryer.
For more information on process heating equipment and applications, please visit our website at www.heat-inc.com
Видео Indirect Temperature Control of Dryers канала HEAT EXCHANGE AND TRANSFER, INC.
A dryer is used for the evaporation of liquids from solids. Most types of dryers are indirectly heated with either an internal exchanger coil or an external heat transfer jacket. This allows the use of remote heating and cooling utilities such as water or oil to precisely control temperatures inside the dryer. A moisture-laden product is introduced into the drying chamber and is heated to a temperature required to drive off liquid from the product. Many dryers operate under a vacuum to facilitate this evaporation. There are a wide range of indirectly heated process dryers available. Shown above is a Shelf Dryer.
For more information on process heating equipment and applications, please visit our website at www.heat-inc.com
Видео Indirect Temperature Control of Dryers канала HEAT EXCHANGE AND TRANSFER, INC.
Показать
Комментарии отсутствуют
Информация о видео
22 ноября 2017 г. 19:26:38
00:00:26
Другие видео канала
Custom Design - Endless PossibilitiesHOW TO Safely Use Hot Oil Filters | HEAT UNIVERSITYIndirect Temperature Control of ExtrudersDEAN RA PUMP - ALIGNMENT VIDEOMeet the EMW Series - Custom Engineered Hot Water/Glycol Systems | HEAT Inc.Meet the HWS 225 Series - Pre-Engineered Electric Hot Water/Glycol Systems | HEAT Inc.HEAT EXCHANGE AND TRANSFER | About UsVirtual Factory Acceptance Tests | HEAT, Inc.Indirect Temperature Control of PressesHOW TO - MP 120 Pump Rebuild | HEAT UNIVERSITYMeet the HOS 550 Series - Pre-Engineered Electric Hot Oil Systems | HEAT Inc.The People of HEAT | About UsHot Oil System Installation Best Practices | HEAT UNIVERSITYNFP 550 Series + CLBS Cooling Module | Live DemonstrationNFP 550 Series - NFPA 87 Features OverviewDEAN RA PUMP - COUPLING INSTALLATION VIDEOIndirect Temperature Control of MixersHow HEAT Makes Custom Engineered Flanged Heaters with Extended Terminal HousingsHOW TO Set the Regulators on an Inert Gas Blanketing System | HEAT UNIVERSITYMeet the DIO Series - Custom Engineered Hot Oil Systems | HEAT Inc.