Загрузка страницы

#49: Simple Component Tester using Oscilloscope - Octopus Curve Tracer

This video shows an example of performing a simple component test (curve tracer) on an oscilloscope. The simple circuit shown is often called an Octopus (I don't know why), and it's been around for decades, in many variants. You can Google search on Octopus component tester, oscilloscope curve tracer, etc. and find dozens and dozens of variants. In the video, I boil the circuit down to its simplest implementation, describe how it works, and demonstrate how you use it.

Видео #49: Simple Component Tester using Oscilloscope - Octopus Curve Tracer канала w2aew
Показать
Комментарии отсутствуют
Введите заголовок:

Введите адрес ссылки:

Введите адрес видео с YouTube:

Зарегистрируйтесь или войдите с
Информация о видео
9 июня 2012 г. 10:34:56
00:10:36
Другие видео канала
#385: How to quickly tune the Penntek TR-45L Z-match tuner#385: How to quickly tune the Penntek TR-45L Z-match tuner#4: Oscilloscope view of TenTec 1254 IF and detected output on Shortwave signal#4: Oscilloscope view of TenTec 1254 IF and detected output on Shortwave signal#35: Using the ADD/INVERT mode on an analog scope to view differential voltages#35: Using the ADD/INVERT mode on an analog scope to view differential voltages#57: Setting up variable double-pulse using Tek AFG#57: Setting up variable double-pulse using Tek AFG#50: QRP SSB contact on 40m from Hamfest of RVRC, June 2012#50: QRP SSB contact on 40m from Hamfest of RVRC, June 2012#98: Surface mount IC soldering demonstration with SO-8 packaged device#98: Surface mount IC soldering demonstration with SO-8 packaged device#364: Ham Radio quickie: Single Sideband (SSB) receive audio quality on the Penntek TR-45L#364: Ham Radio quickie: Single Sideband (SSB) receive audio quality on the Penntek TR-45L#93: RS232 and SPI bus waveforms, bus decodes and RF activity on the Moteino using Tek MDO4000#93: RS232 and SPI bus waveforms, bus decodes and RF activity on the Moteino using Tek MDO4000#34: Installation of upgraded microcontroller in the TenTec 1254 Receiver#34: Installation of upgraded microcontroller in the TenTec 1254 Receiver#64: How to measure speed with a counter/timer#64: How to measure speed with a counter/timer#73: 70's Vintage Function / Sweep Generator review / teardown#73: 70's Vintage Function / Sweep Generator review / teardown#17: Using Analog scope to view two signals of wildly different frequencies#17: Using Analog scope to view two signals of wildly different frequencies#99: Drag Soldering of an SSOP IC Package demonstration#99: Drag Soldering of an SSOP IC Package demonstration#331: Ham Tips: Operating "Split" on HF - info, tips & tricks for operating split or Duplex on HF#331: Ham Tips: Operating "Split" on HF - info, tips & tricks for operating split or Duplex on HF#21: Using MDO4000 to capture 802.11 traffic and export for analysis using RSAVu#21: Using MDO4000 to capture 802.11 traffic and export for analysis using RSAVu#20: Quick 5 minute Tektronix Mixed Domain Oscilloscope MDO4000 Demo#20: Quick 5 minute Tektronix Mixed Domain Oscilloscope MDO4000 Demo#191: Beware of test equipment loading effects!!  Learn from my error!#191: Beware of test equipment loading effects!! Learn from my error!#353: Quick Tips: Using a Transistor Curve Tracer as an Octopus I/V Tracer or Huntron Tracker#353: Quick Tips: Using a Transistor Curve Tracer as an Octopus I/V Tracer or Huntron Tracker#278: Smith Charts: Use SimSmith to design L Matching Networks#278: Smith Charts: Use SimSmith to design L Matching Networks#194: What is ammeter burden voltage, and why you should care.#194: What is ammeter burden voltage, and why you should care.#333: Installation and test of Narrow CW filter in Icom IC-703 - Filter: Inrad #116#333: Installation and test of Narrow CW filter in Icom IC-703 - Filter: Inrad #116
Яндекс.Метрика