If you do 3D printing clay, is this a problem you have encountered?

I am interested if this is something others have found while printing with clay.

When varying the layer hight on a non planar 3d print. I have found is it is sometimes useful to show the print speed on the thicker layers in proportion to the flow needed. This reduces the work needed to be done by the clay pump, ramping up and down, this is especially important with a longer flay feeding tube, that can take quite a while for the pressure to increase and decrease at the print head compered to the pump.
If you want to give my workflow a try, I share my tools and tutorial videos on my Patreon.

Видео If you do 3D printing clay, is this a problem you have encountered? канала claywoven