4x4 Build Ep.11 - Tube Frame, LED Lights
In this video I'm completely welding the tubular frame of the UTV and adding some of the needed reinforcing diagonals. LED light mounts are made and starting to fabricate the floor / footwell while waiting for parts that still haven't arrived.
This is part of a series of a four wheel drive utility vehicle build to lessen the work load on my trusty 2002 Honda Foreman Rubicon TRX500FA. This partially answers the question "Why?" but for those who want to ask "why don't you just buy a side-by-side instead of building one?" I just want to say - I'm not made of money. Side-by-sides are ridiculously expensive, even the car I drive around daily is worth less (not worthless though!), hell, it is even worth less than my 2002 Honda ATV.
"How much HP will it have?" - the 1.4 litre FWD petrol engine I'm planning on using has 55 kw and this will not change, but the torque will be tripled via the BMW differentials I'm using to transfer power to front and rear axles.
"It will be too heavy!" - this project just like the firewood processor project does not have to float. And a heavier vehicle will handle better anyway when hauling heavy loads.
Stay tuned for future episodes! Thanks for watching!
My other videos: www.youtube.com/DonnDIY
#donndiy #homemade #4x4
Soundtrack:
Pomade - Silent Partner (YouTube Audio Library)
Welding equipment borrowed from Spetselektroodi AS, Estonia:
Fronius TransSteel 2700 welder
Optrel Crystal 2.0 Welding Helmet
Hypertherm Powermax 45 XP plasma cutter
Видео 4x4 Build Ep.11 - Tube Frame, LED Lights канала Donn DIY
This is part of a series of a four wheel drive utility vehicle build to lessen the work load on my trusty 2002 Honda Foreman Rubicon TRX500FA. This partially answers the question "Why?" but for those who want to ask "why don't you just buy a side-by-side instead of building one?" I just want to say - I'm not made of money. Side-by-sides are ridiculously expensive, even the car I drive around daily is worth less (not worthless though!), hell, it is even worth less than my 2002 Honda ATV.
"How much HP will it have?" - the 1.4 litre FWD petrol engine I'm planning on using has 55 kw and this will not change, but the torque will be tripled via the BMW differentials I'm using to transfer power to front and rear axles.
"It will be too heavy!" - this project just like the firewood processor project does not have to float. And a heavier vehicle will handle better anyway when hauling heavy loads.
Stay tuned for future episodes! Thanks for watching!
My other videos: www.youtube.com/DonnDIY
#donndiy #homemade #4x4
Soundtrack:
Pomade - Silent Partner (YouTube Audio Library)
Welding equipment borrowed from Spetselektroodi AS, Estonia:
Fronius TransSteel 2700 welder
Optrel Crystal 2.0 Welding Helmet
Hypertherm Powermax 45 XP plasma cutter
Видео 4x4 Build Ep.11 - Tube Frame, LED Lights канала Donn DIY
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Homemade Electric Workshop CraneVolkswagen Camper Complete Van Build Start to finishToyota 1C Engine Full Restoration (Toyota 1C 2C 3C Engine Restoration)Building An Electric Streetfighter Motorcycle - Complete Build & Test Ride!DIY: Multimedia Bluetooth Boombox SpeakerAlmost Perfect Factory Production Process! Most Satisfying Factory Machines and Ingenious ToolsШИКАРНАЯ ИДЕЯ!!!Которая Тебе точно пригодится!!!Making a differential braking tank transmissionDIY Wood Stove made from Car RimsDon't Throw Old Things | Make A Mobile Tools Storage From Old DrumWidening Steel Rims - 4x4 Build Ep.3فكرة رهيبة! أسرار الأنابيب! قم بتشغيل خدعة تعلمتهاRestoration of ancient cars UAZ 469 | Restore and repair of engine gearbox for UAZ 469 vehicleClosing in the container castleEpoxy Dovetail Joint Bluetooth Speaker DIYHow to Diesel Swap a Vanagon - 4x4 Camper Van Build 2.0L TDIBrick house 10000$ \ Сам построил дом на самоизоляции. Смета 750 т.р.Making plasma cutting track1978 Honda ATC 90 Full Restoration - Part 6