PandaHall Jewelry Making Tutorial Video--Make a Chain Bracelet with Pearl Beads for Bridesmaids

PandaHall Presents: http://www.pandahall.com/. Free Coupons: PHENYTB5 (Save $5 for $70+); PHENYTB10 (Save $10 for $140+); PHENYTB15 (Save $15 for $215+). Valid time: Jul. 21, 2017 to Jul. 21, 2018. PST
Besides, when you first time join Pandahall, you can get 10 free coupon cash.

In this jewelry making tutorial, we will teach you how to make a chain bracelet with pearls for bridesmaids. Easy to learn but gorgeous & elegant. Let's start.

Music credit: The Band Perry, "If I Die Yong"

Materials and tools list:
8mm Pink/White Glass Pearls: http://goo.gl/eLQ15Y
Twisted Chains: http://goo.gl/uvx4yv
1mm Elastic Wire: http://goo.gl/v8bBLG
Scissors
Wire Cutter Pliers
Round Nose Pliers
How to make chain bracelet with glass pearl beads?
1: Make the cardboardbeading tool
a. Cut out a rectangle piece from an old cardboard box, measures about 15cm *30 cm;
b. Trim five slits evenly on the two 15cm sides, be sure those on the tops are aligningvertically with the ones at bottom.

2: Start to weave the pearl chain bracelet
a. Take the elastic wire, leave 3~5cm tail and arrange 5 strands on the cardboard. Tape one end for secure;
b. Prepare two strands of chain, about 50cm for each;
c. Place all things well on a desk. Then, from left to right, add one glass pearl on the 1st, 3rd and 5th wire;
d. Fold the chains in half and pass the 2nd and 4thwires through the center link. Now, from left two right, you can number the chains with 1,2,3 and 4;
e. Take the 1stwire, thread it through the next 2nd link on NO.1 & 2 chains. Here, you need to pay attention to the directions of chain links. Repeat the same action with the 3rd wire and NO.3 & 4 chains;
f. Add one glass pearl on the 2nd wire, then thread it through the next 2nd link on NO.1 & 2 chain strands. Now, we’ll get the pearl surrounded by 4 chain segments. Similarly, add one glass pearl on the 4th wire and then thread it through the next 2nd link on NO.3 & 4 chains;
g. Add one glass pearl on the 1st wire, and then thread it through the next 2nd link on NO.1 chain. Next, add one glass pearl on the 3rdwire, and then thread it through the next 2nd link on NO.2 &3 chains. Finally, add one glass pearl on the 5th wire, and then thread it through the next 2nd link on NO.4 chain;
h. Repeat the “f” and “g” for a desired bracelet length.

3. Knot the wires.
a. End the bracelet with a pattern in “f”;
b. Remove the excess chain links with pliers;
c. Take the wires from the splits, and then tie surgeon knots to connect the beginning and ending wire parts;
d. Try another combination by using the white glass pearls.
e. Leave 3mm-7mm at ends and cut off any other excess wires. Then,turn the inside out carefully.

Tada! Now you havehad two of them finished! So amazing, right? Once you get the hang of today’s chain and pearl cuff bracelet,you also take the first steptowards a special and personalized wedding ceremony!

More videos here: http://goo.gl/QyrmiO
For the articles visit:http://goo.gl/Vp76hn

Follow along and have fun!
PandaHall: http://www.pandahall.com/
PandaHall Learning Center: http://lc.pandahall.com/
PandaHall Facebook: https://www.facebook.com/PandaHallcom
PHLC Facebook: https://www.facebook.com/PH-learningcenter-400863680020092/
PandaHall YouTube: https://www.youtube.com/user/PandaHallVideo
PandaHall Google +: https://plus.google.com/u/0/+Pandahall/posts

Видео PandaHall Jewelry Making Tutorial Video--Make a Chain Bracelet with Pearl Beads for Bridesmaids канала Pandahall