DIY OneWheel - After 200km
Firmware 1.15 Released
Everything I have learned riding my DIY OneWheel has inspired this release.
Full project at:
https://www.cammservices.com/projects/onewheelboard
Updates:
Little Smoother Ride
Better Range
Refined Menu Settings
I currently have over 200km on the board. My usual outing on the board is around 7 to 9 km. (Not including quick trips to TimHortons and grocery store.) Current range is around 13km. My average cruising speed is from 15 - 20km/h. Top Speed is over 35km/h but I recommend full motor cycle gear if your going to attempt it. The board has been very reliable, it's never dipped or nose dived on me.
Parts:
48v 800w 10x6 Hub Motor
24x Samsung 18650 25R Lion Cells 12s2p
VESC 4.12
MPU6050
Arduino Nano v3
Sparkless Switch
TM1637 Display Module
Видео DIY OneWheel - After 200km канала CammServices
Everything I have learned riding my DIY OneWheel has inspired this release.
Full project at:
https://www.cammservices.com/projects/onewheelboard
Updates:
Little Smoother Ride
Better Range
Refined Menu Settings
I currently have over 200km on the board. My usual outing on the board is around 7 to 9 km. (Not including quick trips to TimHortons and grocery store.) Current range is around 13km. My average cruising speed is from 15 - 20km/h. Top Speed is over 35km/h but I recommend full motor cycle gear if your going to attempt it. The board has been very reliable, it's never dipped or nose dived on me.
Parts:
48v 800w 10x6 Hub Motor
24x Samsung 18650 25R Lion Cells 12s2p
VESC 4.12
MPU6050
Arduino Nano v3
Sparkless Switch
TM1637 Display Module
Видео DIY OneWheel - After 200km канала CammServices
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Murdering another Li-Po at the ParkFPV | Wing Wing Z-84 | iNavFlightFPV Racing Drone At Toronto Motorsports Park | A.D.D. Version | September 24th, 2016The Cops Were Called! | FPV | DIatone Lizard | Night FlightiNav S800 Still GoingCleanflight Stabilisation on Naze32 DemonstrationDiatone Tyrant 215 - Overview - Maiden - FPVDrift Ops X CoolKidsClub Drift Day Shannonville July 10, 2011FPV | Testing some DYS 5050x3 PropsNot So Big | FPV Sky CraneActive Prop Balancer - 3D PrintedLast practice before FatShark FrenzyBlender and 3D Printing Design | MicroQuad FrameFPV - Tek Sumo - North Brant Sports ParkFPV | My 85mm Blue WaspFPV Racing Drone At Toronto Motorsports Park | Long Chase Version | September 24th, 2016FPV | My 110mm Winter FlyerFlying with some Canadian Geese | FPVYanking on my Reptile | FPVTesting the Glue on my iNav Reptile s800 Sky ShadowBoardOverview