Antique Rusty Cleaver - Restoration

My friend has found this rusty old cleaver on the steel waste. I really liked the unique look of it with the hook instead of a hole to hang it on the wall. As christmas holidays were just around to happen, I knew I had to pick a project that I have all the material ready in my shop, because everybody was in vacation. So i choose to restore this cleaver.
The disassembling was done very quickly, so was the sandblasting.
The original handle was held in place with the peened tang. I didn't really like the shape of the handle and I also didn't wanted to peen the handle again. Si I decided to make a more ergonomic nice looking handle. That's why I shortened the tang around 45mm and drilled three 5mm holes in it. That went very well as the tang wasn't hardened. Next I wanted to make it mirror polished. I startet with the belt sander to grind away all the pitting from the rust. Then it was time for hand sanding. I started with 120 grit, after all the scratches were gone from the belt sander I moved on with 240. Then 400, 1000 and 1200 at the end. I then had a fine enough surface to be able to mirror polish it on the cotton buffing wheel. It took quite some time to do that, but the end result came out absolutely amazing.
Moving on to the handle. I decided to make a three part sandwich. I started by making a spacer out of smoked oak. Cut out the shape of the tang and then glue it on to a piece of pear tree wood. Then I was able to file the spacer to the same tapered thickness of the tang. After gluing the other side of the handle on and drilling the holes for the rivets through I could start to rough shape the handle with a rasp.
I decided to make three screwable brass rivets. I applied some Loctite on the threads and tighten them together. After that I filed the slotted heads away, flush to the handle. Then it was time to give the handle a final sanding with 120, 240, 400 and 1000 grit and apply linseed oil for the final touch. And after sharpening this job was done completely.
I really liked to work on this cleaver. Mirror poilishing was a lot of work and also the work on the handle was quite challenging, but I really liked the end result and I think it speaks for itself.

I hope you like my work and the video.

Huge thank you to all of my Patreon supporters and specially to:
Tonya M Broerman
Zack Thompson
Adel AlSaffar
afreeflyingsoul
Yale Baker
Gregory
Alex McGeorge
Alistair Moor
Amar.k
Anthony Eufemio
Bendurion
Courtney Maleport
David Barker
Greg Marston
Josh Ledford
Joshua Bentley
Lambda GPU Workstations
Luke Schmick
Luke Stone
Matt Boothman
Mellissa Marcus
Monte Gibbs
Muzaffer Aksoy
Nick Houston
Paul Mampilly
Pong Lenis
potokslow
Schultes Thomas
Thomas & Jenni Wendel
Todd Medbury
Tyler Carruth
Vickie Bligh
Vince Valenti
Xavier Carbel
Yuri Zapuchlak
Aaron Quante
Acechadora
Ajna
Alex Breton
Allen Frank
Amanda Taylor, Esq
Andreas Mimra
Andrew Phillips
Anthony Adams
Arni Bjorgvinsson
audi4444player
Blake T
Brandon Fitzwater
Brian Newton
Carl Savage
Carlo
Chad Bryant
Chris Simondet
Grok Senften
Haley McFadden
Harper Kim
Hunter R.
isioviel
Jason Koi
Jason Tarlov
Jeremy Cole
Jonas Richartz
justin f.
Kelly Imgrund
Kurt Gazow
Marc Cerisier
Martin Rønnow Klarlund
Mellissa McConnell
Michael Bier
Mickey Eisenhorn
Mike Donaldson
Nick Cannon
Pasacal Schmikal
Philipp
Regis Vincent
Scott Marshall
Sejo Gavisch
Sergei Shvartsman
Stefan Halter
Subramaniam Venkitaraman
Suiros
Svenja Kuckla
Trevor Kam
Tucker Ifft
Warren G Strand Jr
William Wallace
웅록 윤
My camera:
Panasonic HC-VX11
If you have any questions about the process, machines i'm using or other stuff, just ask me in the comments. I read them all and i try to reply as soon as possible.

Sorry for my bad english, it's not my language. I try my best to improve my technical english.

Subscribe for more of my content. I'm uploading videos about mechanical stuff, as new creations and buildings and also restorations.

Thank you for watching :-)
Building a Huge Rotary Tumbler from Scratch - Homemade Rotary Tumbler
https://youtu.be/c04x6ZF9kKc

„I make a new one“ T-Shirts:
https://teespring.com/stores/my-mechanics

My Main Channel:
https://www.youtube.com/c/mymechanics

My Second Channel:
https://www.youtube.com/channel/UC4EQCwfH54ieNPswtXh5K0w

My Patreon Page:
https://www.patreon.com/mymechanics

Follow me on Instagram:
https://www.instagram.com/my_mechanics/

My Facebook Page:
https://www.facebook.com/My-mechanics-1966277857002099/

Видео Antique Rusty Cleaver - Restoration канала my mechanics